What kind of suspension does a Chevy ZR2 have?
The front wheels of the 2003 Chevrolet S-10 ZR2 are equipped with independent double A-arm suspension, with torsion bars. The rear wheels are equipped with two-stage variable rate suspension, equipped with multi-leaf rear springs.
What kind of steering does a Chevrolet S-10 ZR2 have?
The S-10 is equipped with a recirculating ball-type variable-ratio integral power steering system, with a 13.1 steering ratio when stopped. The S-10 ZR2 has a curb-to-curb turning circle of 41.6 feet, and the steering wheel takes 3.2 turns to go from one lock to the other.
Is the Chevrolet S-10 ZR2 still in production?
While the S-10, after two generations of production, was discontinued in North America in 2004, its production in Brazil has continued on well into 2010. The 2003 Chevrolet S-10 ZR2 came with only one engine option as opposed to other S-10s. It sports a Vortec L35 4,293 cc V6 engine, with overhead valves and push-rods.
How big is the turn circle on a Kia S-10 ZR2?
The S-10 ZR2 has a curb-to-curb turning circle of 41.6 feet, and the steering wheel takes 3.2 turns to go from one lock to the other. The S-10 ZR2 is equipped with vacuum-powered four-wheel disc brakes, with ABS.
Are there ZR2 fender flares on Chevy S10?
As mentioned on the product page, there has been some confusion about mounting our ZR2 fender flares on the Chevy S10 and GMC Sonoma pick up trucks. It turns out that many of these trucks have ZR2 front fenders but non-ZR2 beds.
Can You Mount ZR2 flares on a bed?
If you have a true ZR2 bed, then you will have to create some drop down brackets as shown below. A true ZR2 bed will have holes in the painted face from mounting the original ZR2 flares. It will also have a lip around the edge of the wheel well that is rolled outwards.
Where is the low high beam headlight dimmer switch?
As mentioned at the beginning of the article, the Low-High Beam Headlight Dimmer Switch is part of the Turn Signal Assembly. If you have already taking the steering column covers off, you’ve noticed that the turn signal switch has a lot of wires connecting to it.
What happens when the low beam dimmer doesn’t work?
The most common (and well, probably the only one) is usually the low beam headlights don’t work. In my personal experience, when the Low-High Beam Headlight Dimmer Switch has failed, you’ll only be able to roll around using the high beams only. Well, in this article, I’ll show you how to test it in a step-by-step way.