What kind of front spoiler for Porsche 911 Carrera S?
TechArt Type I Front Spoiler for 997.2 Carrera / S / GTS The new TECHART 2009 Aerokit I program for Porsche 911 models explicitly expresses the silhouette and details… TechArt Type II Rear Spoiler for 991 Carrera / S The TechArt Type II rear wing not only generates more down-force but looks more aggressive too.
What are side skirts on Porsche 911 Carrera shark Werks?
TechArtType I Side Skirts for 991.2 Carrera / S The TechArt Type II rear wing not only generates more down-force but looks more aggressive too. TechArtSide Air Outlet Louvers for 991.2 Carrera / S The TechArt Type II rear wing not only generates more down-force but looks more aggressive too.
What kind of diffuser does Porsche 997 Carrera use?
TechArt Rear Diffusor for 997 Carrera Replaces the rear valence on 997 models with TechArt’s black diffuser with polished strip. Werks One Composites Carbon Fiber Diffuser for 997.2 Carrera / S / GTS The Werks1 Carbon Fiber rear diffuser kit bolts up to any 997.2 model.
What kind of aerokit does a Porsche 997 use?
TechArt Type IV Rear Wing for 997 / 997.2 Carrera / S / GTS For a more aggressive rear-look the TechArt aerokit bolts on any 2009 997. TechArt Type I Rear Wing for 997 / 997.2 Carrera / S / GTS A subtle addition to the rear end.
Is the Porsche 911 Carrera 997 fun to drive?
The car is fun and exhilarating to drive, yet can be used every day. After the success and issues with the 996 versions of the 911, Porsche launched the 997 revised version in 2005. While the 996 was a little rawer, the new 997 was more sophisticated, well behaved and easier to drive.
How to change camshafts on Porsche 911 Carrera?
Now remove the two cam plugs that sit on the end of the two camshafts. You need to remove these green plugs to inspect/check the timing when performing the intermediate shaft upgrade. You basically poke a hole in the center of the shaft and then pull it out. Toss the old ones away, as you will not be reusing them.
Do you need to remove air box in Porsche Carrera?
You will need to remove the air box (see Pelican Technical Article: Porsche 911 Carrera Engine Drop) to gain access. Since you will be removing the plugs any ways go ahead and pull them first, as this will make attempting to rotate the engine by hand easier.
What is the solenoid on a Porsche 911 Carrera?
Shown here is the solenoid that activates the valve that turns on the hydraulic oil pressure supply that advances the camshafts for the VarioCam operation. This solenoid has a habit of failing and needing replacement. Once you have the camshaft covers off, replacement is a snap.
What kind of seats does a Porsche 911 have?
The centre console stripped of PCM (a no-cost option), the swathes of Alcantara, the carbon-backed, Nomex-clad bucket seats and that roll cage all make you want to buckle up and head to your nearest track. Pasha patterns and tartan check aren’t to everyone’s taste but you have to admire Porsche’s trim options during the G-Series Porsche 911 era.
What kind of interior does Porsche 911 GT3 RS have?
If there was one word to describe the 997.2 GT3 RS’s interior it would undoubtedly be “purposeful”. The centre console stripped of PCM (a no-cost option), the swathes of Alcantara, the carbon-backed, Nomex-clad bucket seats and that roll cage all make you want to buckle up and head to your nearest track.
Are there any parts for a Porsche Carrera?
Parts and accessories for the wide range of 911 Carrera models, including Turbo, GT3, & GT2 models. CLICK HERE Porsche Boxster Boxster Parts and accessories for the Boxster model range.
How do you lower the rear of a Porsche 911?
On these cars, the radius arms were equipped with an adjustment screw. To raise or lower the rear of the car, simply loosen the large nut and bolt closest to the torsion bar. Then rotate the other bolt located next to it. This bolt is eccentric, and will cause the rear of the car to be raised or lowered as you turn it.
TechArtType I Side Skirts for 991.2 Carrera / S The TechArt Type II rear wing not only generates more down-force but looks more aggressive too. TechArtSide Air Outlet Louvers for 991.2 Carrera / S The TechArt Type II rear wing not only generates more down-force but looks more aggressive too.
Where to remove chain tensioner on Porsche Carrera?
Remove the bolts that hold the compressor onto the bracket and pull it out to the side of the car. See the Pelican Technical Article on Dropping the 911 Engine for more details. Once the compressor is out of the way, remove the compressor bracket that is located right in front of the chain housing cover.