What kind of fluid goes in a transfer case Ford?

What kind of fluid goes in a transfer case Ford?

FLUID RECOMMENDATIONS Conventional transfer cases require SAE 80W or SAE 80W-90 GL-5 gear lubricant. Full time systems use SAE 10W-30 or 10W-40 engine oil. Conventional transfer cases require DEXRON®II transmission fluid.

How do I change the fluid in my transfer case?

Part 1 of 2: Draining the transfer case

1. Materials Needed.
2. Step 1: Prepare the vehicle. Make certain the vehicle has cooled for at least 2 hours as to not handle hot fluids.
3. Step 2: Drain the fluid.
4. Step 1: Reinstall the drain plug.
5. Step 2: Refill the transfer case.
6. Step 3: Clean up.

Does transfer case fluid need to be changed?

It removes heat and lubricates the internal parts in the transfer case, keeping its gears cool and turning smoothly. To avoid this issue, it is recommended that the transfer case fluid be changed periodically, normally every 30,000 miles, especially in vehicles that tow or use four-wheel drive often.

How many quarts of fluid does my transfer case take?

The fluid level and condition can be checked through the fill plug. In most vehicles, a transfer case is filled with a small amount of gear oil (usually SAE 75W-85, 80W-90 or 75W-140 grade). The transfer case of the Toyota FJ Cruiser in the photo, for example, takes only 1.5 quarts (1.4 liters) of SAE 75W gear oil.

Is it hard to change transfer case fluid?

Replacing transfer case fluid is a fairly simple task on most vehicles. The fluid is usually drained by removing a drain plug, then the drain plug is re-installed.

What kind of transmission fluid does a Ford Bronco use?

****For 1980 to 1987 model years, Ford recommended Dexron II Automatic Transmission Fluid (ATF) for 4×4 Transfer Cases. Dexron II was replaced by Dexron III. For 1987-1996 (Bronco, F150 and 1988-1997 (F250, F350) model years, Ford originally specified Mercon.

What kind of transfer case does a Ford Bronco use?

***1978-1979 NP205 Part Time Transfer Case : For 1978 and 1979, Ford specicifies Ford D8DZ-19C547-A Standard Transmission Lube for all Bronco and F150-F250-F350 transfer cases including the NP205. Ford specification is ESP-M2C83-C.

How to transfer case fluid in Ford 4×4?

Ford 4X4 Vehicles: Transfer Case Fluid Drain and Fill Procedure w/ Very Important Tips! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What kind of lube does a Ford Bronco use?

For 1978 and 1979, Ford specicifies Ford D8DZ-19C547-A Standard Transmission Lube for all Bronco and F150-F250-F350 transfer cases including the NP203. Ford specification is ESP-M2C83-C.