What kind of engine does an Indy XLT have?
The Indy XLT’s standard features include a backrest as well as hand and thumb warmers. The later models of the XLT Touring edition used much of the same equipment as models from previous years. The 1998 XLT Touring snowmobile uses a three-cylinder engine with a 597-cubic-centimeter displacement.
What are the standard features of a Polaris Indy XLT?
The Indy XLT’s standard features include a backrest as well as hand and thumb warmers. The later models of the XLT Touring edition used much of the same equipment as models from previous years.
What kind of Springs does Polaris XLT have?
The XLT’s springs use a coil/variable front torque arm and a torsion/coil rear torque arm with a spring diameter of 0.437 at 77 degrees. The XLT Touring snowmobile uses a 133.5-inch track with a polyester-c construction and a lightning style track pattern.
How much torque does a Ford 4.6L 281CI have?
33 396 44.74 Type: Bolt 46 552 62.37 Type: Bolt 19 228 25.76 Modular OHC – Coil Pack Bracket to Timing Chain Cover Type: Bolt 7.5 90 10.17 Type: Bolt 22 264 29.83 Modular OHC Cap Bolts 22 FtLbs + 90deg Type: Bolt 22 264 29.83 Modular OHC Cap Bolts (Tighten 1st) 22 FtLbs + 90deg Type: Bolt 7.5 90 10.17
What’s the torque pattern for a SBC engine?
First time around, set your torque wrench to 20, follow the pattern, then repeat the pattern (image above) again after setting the wrench to 30. The image above shows the torque pattern to be used when reinstalling the heads on any SBC engine. “The book” says to follow the pattern twice, cutting the torque spec in half the first time.
What are the torque specs for a hemi engine?
Following the bolt pattern in the image above, you need to three-step your head bolts to a final torque of 105 lb-ft with 318 and 360 engines. Hemi engines are quite different. Mopar still specifies a three-step torqueing process, but they specify what torque to use at each step, plus they break it down by what head bolts are used.
33 396 44.74 Type: Bolt 46 552 62.37 Type: Bolt 19 228 25.76 Modular OHC – Coil Pack Bracket to Timing Chain Cover Type: Bolt 7.5 90 10.17 Type: Bolt 22 264 29.83 Modular OHC Cap Bolts 22 FtLbs + 90deg Type: Bolt 22 264 29.83 Modular OHC Cap Bolts (Tighten 1st) 22 FtLbs + 90deg Type: Bolt 7.5 90 10.17
What are the torque specs for a Ford engine?
As for the torque specifications, the 289 (above top) and 302 intakes are both torqued in two stages to between 20 and22 lb-ft. The 351 intake, on the other hand is torqued in three stages to between 23 and 25 lb-ft. Ford Head Bolt Torque Sentences and Specs The torque sequence for all three Ford engines can be seen in the photo above.