What kind of engine does a Honda Integra B18C have?
For the B18C 98 Spec R engine, the 4-1 header was used. The power was 200 HP @ 8,000 rpm; and the torque was 186 Nm @ 7,200 rpm. This engine can be found in Honda Integra Type R. The B18C Type R engine can be identified by the red valve cover, the 4-1 header, and an intake collector. 8. B18C1 was an engine for USDM Acura Integra GSR.
Are there any problems with the Honda B18 engine?
Honda B18 engine problems and malfunctions. One cannot expect miracles from this very old motor, it was reliable and durable long ago, but not today. Today, all B18s are worn out, and anything can break at any time of day or night. There’s nothing you can do, just regularly service your engine and use good engine oil.
What are the specs of a Honda Civic B18C?
The power was 142 HP @ 6,300 rpm and the torque was 172 Nm @ 5,200 rpm, with the rev limit of 7,200 rpm. This engine was intended for Acura Integra, Honda Integra, JDM Honda Domani and Orthia. 3. B18B2 was the B18B1 for Australia 4. B18B3 was the version for Honda Civic for South Africa and the Middle East.
What kind of engine is in a Honda Civic?
Honda B18 engine The Honda B18 engine is built as a pure DOHC engine for the most part as a VTEC engine in compact cars from Honda. It is found in the Civic, CRX, CRX Del Sol, Integra, CR-V and some other models. The displacement ranges from 1,797 cc to 1,834 cc The power range is from 126 to about 200 hp for the JDM Type R.
For the B18C 98 Spec R engine, the 4-1 header was used. The power was 200 HP @ 8,000 rpm; and the torque was 186 Nm @ 7,200 rpm. This engine can be found in Honda Integra Type R. The B18C Type R engine can be identified by the red valve cover, the 4-1 header, and an intake collector. 8. B18C1 was an engine for USDM Acura Integra GSR.
The power was 142 HP @ 6,300 rpm and the torque was 172 Nm @ 5,200 rpm, with the rev limit of 7,200 rpm. This engine was intended for Acura Integra, Honda Integra, JDM Honda Domani and Orthia. 3. B18B2 was the B18B1 for Australia 4. B18B3 was the version for Honda Civic for South Africa and the Middle East.
How big is the intake valve on a Honda B18C?
On top of the cylinder block, a 16-valve non-VTEC DOHC head was installed. The intake valve diameter was 31 mm, exhaust valves diameter was 28 mm, valve stem diameter was 6.6 mm.
Honda B18 engine problems and malfunctions. One cannot expect miracles from this very old motor, it was reliable and durable long ago, but not today. Today, all B18s are worn out, and anything can break at any time of day or night. There’s nothing you can do, just regularly service your engine and use good engine oil.
What was the first version of the Acura Integra?
B18A1 was the first version for USDM Acura Integra. Specifications of camshafts: duration 270/276 deg, lift 9.95/9.65 mm. The compression ratio was 9.2, the power was 132 HP @ 6,000 rpm, and the torque was 164 Nm @ 5,000 rpm. After 1991, power increased to 142 HP @ 6,500 rpm, and the torque was 178 Nm @ 6,100 rpm. 2.
Is there an analog to the Honda Integra Type R?
B18C6 was a European analog to B18C Type R, which was installed in Honda Integra Type R. 14. B18C7 was an Australian analog to B18C Type R, which may be found in Honda Integra Type R. One cannot expect miracles from this very old motor, it was reliable and durable long ago, but not today.
How to make LS B18A build without VTEC?
Forum member CW96 started the thread to try to get everything into one place, and then link out to each individual story about the subject. Each part of the process is broken down into sub-categories with associated links.
What’s the difference between a B18B and B18C Type R?
B18C was a sport motor, its main difference from the B18B are listed above. B18C power was 180 HP @ 7,200 rpm, the torque of 171 Nm @ 6,200 rpm, while the redline is set to 8,400 rpm. It was developed for JDM Honda Integra SiR. 7. B18C Type-R was an improved analogue of B18C and B18C5.
What kind of engine does an Acura Integra have?
Acura Integra Engines are very famous. In the U.S the LS, RS, GS grades had Non Vtec B18B engine and the GSR & Type R had B18C DOHC VTEC engine. We carry low mileage Acura Integra motors for all grades of Integra. Our Used Acura Integra engines are carefully selected by our staff in Japan.
What’s the difference between a B18B and B18C?
B18B4 was an analogue of B18B3, the power was increased to 140 HP @ 6,200 rpm, and the torque was 171 Nm @ 4,900 rpm. 6. B18C was a sport motor, its main difference from the B18B are listed above. B18C power was 180 HP @ 7,200 rpm, the torque of 171 Nm @ 6,200 rpm, while the redline is set to 8,400 rpm.
Is the Honda type are a B18C swap?
It’s packing a B18C swap from an Integra Type R, weighs just a hair over 2,200-lbs and runs a staggered set of Advan A050 competition rubber. Check out the wheels, too. We love the bronze TE37s out back contrasting with the white Advan-looking wheels up front.