What kind of door lock does a Jeep Cherokee have?

Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37″ Toyo MTs. I will assume you have a 4 door Cherokee.

What’s the problem with my 1998 Jeep Cherokee?

1998 jeep Cherokee classic has door locking/unlocking problem. sometimes they work and sometimes they don’t. passenger door lock makes a ticking noise when I push the door lock on drivers door. nothing will lock or unlock electronically. any help on how to fix would be very helpful. oldman44oldjeep98, May 1, 2018.

Why is my passenger door lock not working?

If the passenger door button doesn’t work you will have to dig deeper and figure out where the problem is like 2oldjeeps says. The switch is the most common problem though. The door lock circuit is actually in the passenger door. I have an issue with my 00 XJ where they will work only occasionally and I can hear one of the relays clicking.

How to fix power windows on Jeep Cherokee?

Not just by jumping a wire in the kick panel that disables the lock-out button. This regains full use all passenger windows as well as keeping the child safety button functional when needed. This will also fix power locking and RKE issues when the re-flowing procedure in the video is done to the PASSENGER side module.

Is the power door lock on a Jeep Grand Cherokee working?

This feature is not available right now. Please try again later. 2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

How to get full access to my Jeep Cherokee?

To get full-access, you need to register for a FREE account . Discussion in ‘ Electrical ‘ started by oldman44oldjeep98, May 1, 2018 .

Why is the passenger door not working in my Jeep?

There are multiple short-range antennas in your GC, including one around the perimeter of the spare tire well (for tailgate operation). The fob will start operating randomly as the battery gets weak and then eventually not at all, requiring you to use the fob manual key to unlock the door.

Is there a door lock on a Jeep Grand Cherokee?

99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. – YouTube 99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

What is the wiring diagram for a 1999 Jeep Grand Cherokee?

Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1999-2004 Jeep Grand Cherokee . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle.

Is there a remote for the Jeep Grand Cherokee?

Shop AutoZone for Jeep Grand Cherokee Remote Keyless Entry. Notes: Black, 4 button. Without remote start

How can I unlock my Jeep with remote key?

I park the truck to get out. I put it in “Park”, turn off the truck, remove the key, open the door, get out of the truck, close the door et then I try to lock the doors using my remote key but nothing happens. I can try 1, 2, 3 or 10 times to lock/unlock, nothing happens at all.

Why does my Jeep not unlock the passenger side door?

The power lock motor operates in 2 directions, by reversing the current. So if the motor works in one direction, the motor itself is ok. So maybe it is some wiring problem to the unlock side. The passenger side doors, the LH aft door and the liftgate are all controlled from the Passenger Door Module.

Where is the liftgate on a Jeep Wrangler?

The passenger side doors, the LH aft door and the liftgate are all controlled from the Passenger Door Module. I would start by looking into the fwd passenger door boot to see if there is any wire broken. This happened to my brothers ’00 WJ on the passenger side and I ended up replacing the lock actuator.

Can you reset the panic alarm on a Jeep Cherokee?

The Jeep’s remotes allow you to control your panic alarm, your door locks and your trunk release, and can be programmed completely from your driver’s seat. The programming sequence will also allow you to reset the remote systems, and you can have them ready to use in minutes using just the ignition key.

How to reset the anti theft on a Jeep Cherokee?

How to Reset the Anti Theft on a Jeep Cherokee. 1 Step 1. Enter your Jeep and press the Lock button on your keyless remote five times in 10 seconds. 2 Step 2. 3 Step 3. 4 Step 4.

How to troubleshoot a Jeep XJ Cherokee problem?

“If the power lock system is inoperative with either front door power lock switch, test the Passenger Door Module (PDM)…If the power lock system is inoperative with only the driver side front door power lock switch, test the Driver Door Module (DDM).” I can help you troubleshoot beyond these symptoms, too.

How can I Fix my Jeep XJ Cherokee door?

Possible remedy: There is a slot on the rear facing edge of the door that has an adjustable slide for the door button. Work the button and watch this lever move. You can loosen the Torx screw and move the lever/button adjuster to allow for a full throw of the outside handle button when you press the button.

What are the features of a 1999 XJ Cherokee?

The XJ Cherokee in the article is our 1999 Cherokee Sport 4-door with power windows, power door locks, power mirrors and remote keyless entry (RKE). The passenger side front door module is the “brains”, containing both relays and switches. A quote from Chrysler helps:

Is there a problem with my Jeep Grand Cherokee?

Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.

Why does my Jeep Grand Cherokee not shift gears?

For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually. The most common cause of transmission problems is the easiest to fix: check the fluid level in the transmission and restore it to the proper levels.

Can a Jeep Grand Cherokee Drive in two gears?

You’re often still able to drive the vehicle, but it only operates in one or two gears. For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually.

What causes the solenoid to disengage from the engine?

When the TCC solenoid receives a signal from the engine control module (ECM), it opens a passage in the valve body and hydraulic fluid applies the TCC. When the ECM signal stops, the solenoid closes the valve and pressure is vented, causing the TCC to disengage.

What should I do if my GM solenoid lock up?

Connect the alligator clip of your test light to ground. Unplug the wires at the case and place the tip of your test light on the terminal marked A. Do not depress the brake pedal. Computer controlled vehicles: turn on the ignition and the tester should light. All other vehicles: start the engine and bring to normal operating temperature.

When does a solenoid need to be replaced?

Starter – Some solenoids are mounted to the starter, but some are located directly inside the starter housing. When this is the case, it may be necessary to replace the entire starter when the solenoid goes bad. Sometimes the starter itself is the problem. Electrical issues can be annoying and inconvenient.

Why does my car door lock need to be replaced?

There are several reasons why a door lock actuator may need to be replaced. Sometimes a door lock actuator stops working completely. In some cars, a door lock actuator becomes noisy and produces a squeaking or buzzing noise when the power door locks are locked or unlocked.

How to fix a door lock on a Jeep Grand Cherokee?

Fixing a stuck door lock on your 2005-2010 Jeep Grand Cherokee is one of the easiest things you can do yourself. Removing your interior door panel to access the locking mechanism is easy, and I’ll walk you through it. Don’t spend $200+ on this at the dealer. Instead, watch this detailed video and save yourself some dough.

Where can I get a replacement passenger door module?

You can get a replacement Passenger Door Module (PDM) from RockAuto for about $60. The passenger side module isn’t as easy to open up as the driver side so it may be easier to just replace it than try to fiddle with it.

What can I do about the rear door latch on my Jeep Cherokee?

You can loosen the Torx screw and move the lever/button adjuster to allow for a full throw of the outside handle button when you press the button. This and some white lithium spray lube at pivot points of the latch mechanisms can have your “defective” rear door latches functioning as new!

Where is the right front switch on a Jeep Cherokee?

With the relays and switching that take place within the PDM (right passenger front switch module), it’s best to replace this right front door module/switch assembly— in any case .

How to lock the front door with a key fob?

1. May only pertain to MY 2014 and must have autostart; with the driver door open (or driver door plus other doors open) press autostart button twice then put keys on the front seat and close all doors, DONE! Keys now locked in the car 2. Pertains to all vehicles, I think, with key fob or remote.

How to reset Jeep Grand Cherokee Laredo security system?

Notes: If you see an intermittent problem like this, consider getting OEM (original equip. mfg., i.s, jeep) key. You can give your VIN number to the dealer to have one made. Insert your key and turn the drivers side door lock to the right , then left and then right again …this will reset the security system.

Why did my Jeep Grand Cherokee keys get deleted?

If you have gotten new keys for the car it is possible that the key got deleted during program of the new keys, either because the locksmith/dealer cleared existing keys, or because you exceeded maximum number of keys allowed by the WCM, which will delete oldest keys first as new ones are added.

Can you replace the interior door handle on a Jeep Grand Cherokee?

Door seal weatherstripping can be attached to the door or the body of the vehicle… HELP!™ Interior Door Handle by Dorman®. With this product, there is no need to replace the entire door opening mechanism and pay extra money. Constructed to fit the exact design of your vehicle, this door handle features OEM quality…

What was the problem with my Jeep Grand Cherokee?

2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

Why are the passenger side doors not unlocking?

Just the passenger side doors won’t unlock. but they always lock The power lock motor operates in 2 directions, by reversing the current. So if the motor works in one direction, the motor itself is ok. So maybe it is some wiring problem to the unlock side.

Why is there no switch on my Jeep Cherokee?

1. The part breaks and they take it in to get it fixed. 2. The part breaks and they they to fix it themselves (which usually works). 3. The part breaks and they simply don’t fix it. One thing about us Cherokee owners is that we tend to either be frugal, or we refuse to replace the Jeep because we love the darn thing too much!

What’s the Master Lock out switch on a jeep?

UNHOOK the battery before you do the paperclip thing or you will electrocute yourself). This confirmed that it was indeed the lock out switch on the drivers side. The only other solution to my problem was to replace the master power windown/lock switch cluster.

Why is my Jeep Grand Cherokee stuck in 4 Low mode?

Engaged 4 low to ensure system is working. When vehicle shifted to 4 low, service 4wd light appears again. Also service stabilitrac, forward collision not available. Car is stuck in 4 low and will not go to awd mode.

Where was the Jeep Cherokee that shifted into neutral?

While approaching a stop, the vehicle inadvertently shifted into neutral. The failure occurred intermittently and without warning. The vehicle was taken to monroeville Chrysler Jeep 3 (651 william penn hwy, monroeville, PA 15146, (412) 856-1422) where the transfer case was repaired twice and the motor as well.

Why are my power windows not working on my Jeep Grand Cherokee?

While some other SUVs were manufactured with body-on-frame construction, the Jeep Grand Cherokee has always used a unibody chassis. Why won’t my power Windows work? I have a 1999 jeep grand Cherokee with the v8 engine and none of my Windows will go up or down.

Why is my Jeep Grand Cherokee door lock not working?

I pushed the black boot between the door jam back and found the power wire broke (orange w/black tracer)fixed it but it st up lol is not working. I did the battery thing for 30 min also. Still nothing. I’m losing my mind here. 18 people found this helpful. My 2004Jeep Grand Cherokee driver door locks and all windows stopped working.

When to replace door lock actuator in Jeep Grand Cherokee?

Your Grand Cherokee holds up through all kinds of driving conditions. You don’t want to let a minor malfunction slow you down, so replace your Jeep Grand Cherokee door lock actuator with a part from AutoZone as soon as your locks become unresponsive. Power locks are a convenient addition to any car until they stop working.

Where can I get a new Jeep Grand Cherokee door?

Right today, you have a great opportunity to come to CARiD.com where you will be able to find a wide selection of the Jeep Grand Cherokee Doors produced by the most well-known manufacturers all over the world, among them you can find Replace and Goodmark. These brands offer only high quality products which your Grand Cherokee will definitely like.

What to do if your power door lock is not working?

If fuse is ok, i would first check the wires in the boot between the door and the body for any broken wire. If this is ok, you will have to measure on the window motor connector to see if power is there. Regarding the hatch door lock, there most probably the lever connecting the actuator to the actual lock has become loose.

Is there a problem with my Jeep garage door?

After some searching on the internet i found out that this problem happened already with quite some other WJ’s. Most of the time the black ground wire in the rubber boot between the door and the body breaks. Sometimes the orange wire breaks.

Why are my power locks not working on my Jeep?

There is a combination flasher unit under the drivers side dash, but it acts for turn signals as well hazard lights. It is an electronic controlled relay, so maybe the problem is in there. If it was wire related, the problem should be there for the hazard lights as well.

What happens when your door lock actuator fails?

When your actuator fails, the latch stops activating and your key remote essentially becomes useless. Instead of unlocking your doors manually, come to AutoZone to get a replacement. We have Grand Cherokee door lock actuators that are easily installed and made to endure the endless routine of locking and unlocking.

With the relays and switching that take place within the PDM (right passenger front switch module), it’s best to replace this right front door module/switch assembly— in any case .

Navigation