What kind of axles do jeeps use?
Stronger axles, such as Dana 44 and 60, as well as heavier-duty front Dana 30, are designed to accommodate these heavier loads that normally will bend stock axles. Plus, many will come with upgraded gearing to help with larger tires, as well as beefier differential covers to stand up to any off pavement adventure.
How to change an axle on a jeep kJ?
Try to be easy on the axle seal and pull the axle straight out and not at an angle. -Once the old one is out you can toss the new one right in its place. -Put the ball joints, sway bar link, and strut bolt back together. -Return the old axle for your core money, and return the socket for that money back.
How to change an axle on a Jeep Liberty?
Try to be easy on the axle seal and pull the axle straight out and not at an angle. -Once the old one is out you can toss the new one right in its place. -Put the ball joints, sway bar link, and strut bolt back together.
How do you change a front CV axle?
Get the clevis lined up with the LCA, put in the bolt then release the strap. Just Bought an 04 replacing all bushings from one end to the other. This was todays chore.CV’s Thanks for the write up and especially Pictures.
Dana 30 differentials are used in most Jeeps. From the CJ-series (CJ5, CJ7, CJ8 Scrambler) to the YJ, TJ Wranglers, and even XJ Cherokees. These axles would be made for open-end steering, meaning they allow for front spindles and parts that will enable the vehicle to turn.
How many axles does a jeep Dana have?
The differential housing has two axles (a left and a right). Typically they are about the same, except the length can be different (but on some vehicles, they can be the same exact part, left and right).
Is the Jeep differential the same as the Jeep?
Jeep has used a variety of differentials over the years, and they can look almost the same. But since you can buy the entire housing or even a complete differential setup, it’s easy to see the differences once you take a closer look.
Where do you find the axle number on a jeep?
The model number and date are self explanatory. The Bill of Materials (B.O.M) number is stamped on the right or left hand tube of the driving axles and with the help of a Spicer catalog you should be able to get all the specs and part numbers for the axle.
How can I tell if my Jeep has a Dana axle?
The illustration below will help identify the Dana Axle in your Jeep. The model number and date are self explanatory. The Bill of Materials (B.O.M) number is stamped on the right or left hand tube of the driving axles and with the help of a Spicer catalog you should be able to get all the specs and part numbers for the axle.
Dana 30 differentials are used in most Jeeps. From the CJ-series (CJ5, CJ7, CJ8 Scrambler) to the YJ, TJ Wranglers, and even XJ Cherokees. These axles would be made for open-end steering, meaning they allow for front spindles and parts that will enable the vehicle to turn.
How are the gears on a Jeep Wrangler identified?
The shop confirms that the axle is bent and the housing damaged and as a result of the bent axle the gears were worn. So they replaced everything based on the Vin#. So, I don’t know if any gears up front were replaced with the front axle (I will ask). but, I do know that they were replaced in the rear.