What is the fuel mixture for a Johnson outboard motor?

Any Johnson outboard motor built since 1964 requires a 50/1 fuel ratio. Motors built prior to that date require a 32/1 ratio, with the exception of a few fishing motors built prior to 1955 that use a 16/1 ratio. Johnson outboard motors are two-cycle engines.

What’s the fuel mix for a 1962 Johnson Seahorse?

Discussion in ‘ Outboards ‘ started by crispy1960, Aug 28, 2010 . I am new to this site, hoping for some help. I recently acquired a 1962 Johnson Seahorse 5.5. Runs great, needs a couple of lower end parts which I have a line on, but I have conflicting info on the fuel and oil mix. Is it 50:1 or 25:1? Don’t want to burn it up. 25:1 it is.

What kind of oil do you use on an old Johnson 5?

Regular motor oil in those days didn’t have detergents, or a slew of other additives. Today, it’s probably much safer to stick with the 2-stroke oils. Don’t let the urgent displace the important… I’m not sure if the old 5 had a bushed small end but oils are way better now then then.

How much oil does a 2 stroke Johnson use?

Well I’m not sure if this is it but I have a 6 gallon tank for my 2 stroke Johnson. I put one pint of oil in. (50:1) Anyways I used my boat the other day for about an hour.

Where to buy Johnson 15 hp motor parts?

If you need parts, we’ve got everything you need for the little fixes, the big fixes, the maintenance, and everything in between. Boats.net is the source for thousands of Johnson 15 HP outboard parts to help you do the job, all with the deep discounts that help you save money on all of our OEM Johnson marine parts.

What kind of outboard does a MerCruiser seahorse have?

Vocational, Technical or Tra… MerCruiser Certified Techni… It is a 1990 Johnson 9.9 Seahorse. While we use it trolling It is a 1990 Johnson 9.9 Seahorse. While we use it trolling there is a small amount of milky looking oil film coming out of lower unit into lake. in a … read more

What should mixture ratio be on Johnson Evinrude?

Please note that some Johnson and Evinrude Owners Manuals mention 100:1 mixture ratio after the motor is completely broken in, but most experts suggest against doing that. Stick with 50:1 for the 1964 and newer motors.

Can a 7.5HP engine use a 50 / 1 mixture?

In years past OMC issued a bulletin that all their engines could use the 50/1 mixture, excepting the 1957 7.5hp model, and many boaters were using that 50/1 mixture in all the older models regardless of horsepower. I lost track of that bulletin unfortunately and if anyone has it, I’d appreciate having a copy of it.

New engine break-in (not direct injection) requires 25:1 Please note that some Johnson and Evinrude Owners Manuals mention 100:1 mixture ratio after the motor is completely broken in, but most experts suggest against doing that. Stick with 50:1 for the 1964 and newer motors.

What kind of oil do you use for an outboard motor?

I need to know what oil/gas mixture I should use. I also wanted to know if I should be using just regular 2-cycle oil or the Marine oil? correct 1973, 50 : 1 TC-W3 rated outboard motor oil. Hi Guys, just purchased 1986 Johnson 20hp. Everything I find on here says fuel mix is 50 to 1, on the side of the motor it says 100 to 1.

What’s the fuel mix on a 1986 Johnson 20hp?

Hi Guys, just purchased 1986 Johnson 20hp. Everything I find on here says fuel mix is 50 to 1, on the side of the motor it says 100 to 1. Whats correct? Thanks Mugwump Hi Guys, just purchased 1986 Johnson 20hp. Everything I find on here says fuel mix is 50 to 1, on the side of the motor it says 100 to 1.

What kind of oil do you put in an Evinrude?

The following (in bold) is from the Evinrude website: What is the Fuel/Oil mixture for my (Johnson or Evinrude) motor? Please note that some Johnson and Evinrude Owners Manuals mention 100:1 mixture ratio after the motor is completely broken in, but most experts suggest against doing that. Stick with 50:1 for the 1964 and newer motors.

How do you start a Johnson outboard motor?

Start the Johnson outboard motor. Let it idle for a few minutes to warm up. Remove the engine cowling as per the instructions in your Johnson outboard motor owner’s manual. When doing this, you will possibly be exposed to moving parts that are normally enclosed by the engine cowling.

What kind of fuel mix do I need for my 15 hp Evinrude?

I need to know what fuel mixture to use. The ( CE ) in your model number says it is a 1989 so that would use a 50:1 mix. Use 16 ounces of TCW-3 rated oil to six gal. of gas. This is US measurements I just bought an ’85 15 horse and my motor has a sticker on it calling for 100:1 mix.

What’s the RPM on a 1978 Johnson Evinrude?

The 15 hp motor is rated at 5500 -7000 RPM according to a 1978 Johnson sales brochure. This higher RPM is achievable by using a different carburetor which uses a larger throat, which gains a higher fuel/air mix.

Is there problem with oil gas mixture Johnson 25hp?

Well It’s a 1990 Johnson 25HP model J25REIE. If it is a problem with the mixture,how do I go about Flushing it out of the engine? jeepgeye, Things aren’t as bad as you might think.

How much oil to put in an old Johnson Boat?

I’m getting ready to fire up an old Elgin 2 1/2 hp sometime today (as soon as work stops getting in the way…). The owner’s manual calls for ‘3/4 pint oil with one gallon of gasoline,’ which is about ten:1.

What should the fuel to oil ratio be on a 1964 Evinrude?

Stick with 50:1 for the 1964 and newer motors. Models that have working VRO Pumps (Variable Ratio Oilers) do not require oil to be mixed with fuel. The pump is doing the mixing. Below is some additional information from our friend and frequent forum contributor Joe Reeves:

What should mixture ratio be for 1964 Evinrude?

1964 and newer use 50:1 New engine break-in (not direct injection) requires 25:1 Please note that some Johnson and Evinrude Owners Manuals mention 100:1 mixture ratio after the motor is completely broken in, but most experts suggest against doing that. Stick with 50:1 for the 1964 and newer motors.

How many horsepower does an Evinrude outboard motor have?

Evinrude was founded by Ole Evinrude in Milwaukee, Wisconsin, in 1907. Evinrude filed for bankruptcy in 2000 and was bought by a Canadian company by the name of Bombardier Recreational Products. Evinrude produces two-stroke direct fuel-injected motors that vary between 25 and 300 horsepower.

When did the Johnson OMC 6 hp come out?

So, from what I saw there, it appears there were a lot of the older OMC smaller motors still around and being sold. It appears the first OMC 6 hp were introduced in 1965, Johnson model was CD, while the Evinrude code was from 6200 to 6900.

What is the repair manual for a Johnson Evinrude?

1971-1989 Johnson Evinrude Outboard 1.25-60 hp 2 Stroke (1-2 Cyl) Engines Service Repair Manual (Complete FSM Contains Everything You Will Need To Repair Maintain Your Outboard Motor!) Download Now Johnson Evinrude Outboard 1.5 Hp to 235 Hp Service & Repair Manual (1965 to 1989) – Download! Download Now

Where do I find the oil to gas ratio on my Boat?

Often, the required ratio for the motor is written right on, or near the fuel cap. For a 40:1 ratio there are two easy ways to figure it out. The first is to multiply the number of litres by 2.5 and then add a decimal place to get the number of millilitres of oil that you have to add.

What kind of oil do you put in a Mercury outboard?

– Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil – Mercury or Quicksilver Premium Plus 2-Cycle TC-W3 Outboard Oil 2-stroke oil is normally added to the fuel tank when filling with fuel.

Where are the high speed jets on a Johnson Evinrude?

BUT do make sure that you manually inspect and clean the two brass fixed high speed jets which would be located in back of the two 7/16″ slotted hex head bolts in the bottom front portion of the float chamber. Lift the center High Speed Control lever and turn it so that the point faces forward, resting on the high ridge.

What kind of oil does a Johnson Seahorse use?

I recently acquired a 6hp Johnson Seahorse Model #6RL-73S. I assume based on the model number this is a 1973 model engine. I need to know what oil/gas mixture I should use. I also wanted to know if I should be using just regular 2-cycle oil or the Marine oil? correct 1973, 50 : 1 TC-W3 rated outboard motor oil.

– Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil 2-stroke oil is normally added to the fuel tank when filling with fuel. The underlying provider failed on Open.

What’s the ratio of oil to gas in an outboard?

The short answer is 50:1.That is 50 parts gas to 1 part oil. Most outboard motors run this mix. Some very small outboards tell you 100:1 but I recommend you run 50:1. The logic here is that I would rather replace an occasional spark plug then blow up the motor.

How do you mix gas and oil for two cycle?

To mix two-cycle fuel, start by putting the correct amount of oil in the gas can. Then slowly add the correct amount of gasoline. Do not try to mix the gas and oil directly in the gas tank of the equipment. IMPORTANT: Do not use any fuel that is over 30 days old. Do not mix more fuel than you are likely to use in a month.

What is the gas to oil mixture for my outboard motor?

What is the Gas to Oil Mixture for My Outboard Motor? The short answer is 50:1.That is 50 parts gas to 1 part oil. Most outboard motors run this mix. Some very small outboards tell you 100:1 but I recommend you run 50:1. The logic here is that I would rather replace an occasional spark plug then blow up the motor.

What is the mixture of oil and gas in a 2 cycle engine?

If the engine has a single fill port for both engine oil and gas, it is a 2-cycle engine that requires a specific mix of oil and gas to function properly. The mixture of gas and oil is written as a ratio that represents the parts of gasoline and the parts of oil.

What kind of fuel does a Mercury outboard use?

Pre-Mix Models Fuel/oil ratio: 50:1 (50 parts fuel to 1 part oil) Oil requirement: – Certified TC-W3 2-Stroke Outboard Oil – Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil

How much oil is in a 2 stroke oil mix?

2-Stroke Oil Mix Calculator For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas. For a 32:1 mixture, use 4 fluid ounces of oil per gallon of gas.

How to adjust the carburetor on a Johnson Evinrude?

Top slow speed = seat gently, then open 1-1/2 turns. Setting the high and low needle valves properly: NOTE: For engines that DO NOT have a shift selection, obviously there is no NEUTRAL position. Simply lower the rpms to the lowest setting to obtain the low speed needle valve adjustment.

Where can I find 1977 Johnson outboard parts?

Find accessories and kits by diagram for 1977 Johnson Evinrude outboard motors. Drill down from the year, horsepower, model number and engine section to get an online inventory of genuine OEM and aftermarket Johnson Evinrude outboard parts. Your Johnson Evinrude model number is the key to finding the correct parts for your outboard motor.

What are the colors of the Johnson Evinrude?

Johnson Evinrude Outboard Spray Paint & Color Charts Engine Model Year Paint Color Part Number 1963-69 Polychromatic Blue 0771259 1964-76 White 0771236 1967-71 Arctic White 0771269 1968-69 Forest Green 0771261

What kind of oil do you put in a Johnson 35hp engine?

The fuel mix is 50:1 91 RON rated petrol to TC-W3 rated outboard oil. That’s 20ml of oil per litre of petrol. If it’s been a very long time since the engine’s been run, I usually start it with a bit of a heavier mix but never more than double.

How many HP does a Johnson Evinrude have?

MODEL HP 25BACS / 25BALCS 25 25BECS / 25BELCS 25 25BFCS / 25BFLCS 25 25ECS / 25ELCS 25

What should the oil and gas ratio be on an outboard?

Most outboard motors run this mix. Some very small outboards tell you 100:1 but I recommend you run 50:1. The logic here is that I would rather replace an occasional spark plug then blow up the motor. The decision is yours but that is my 2 cents. Some older outboards 50’s, 60’s and some older recommended mixtures as oil rich as 24:1.

How do you calculate the oil ratio for a two stroke engine?

Click the “Calculate” button to find the quantity of oil required. Two-stroke (sometimes called 2-cycle) engines run on a mixture of gasoline and oil. When the substances are mixed, they both lubricate the engine and create combustion.

How does the oil ratio work in a gas tank?

The ratio tells you the quantity of fresh standard unleaded gasoline (10% ethanol or lower) is needed for a specific quantity of oil. Step 2: Mixing should take place in a fuel can, not inside the tank. Step 3: Once you have mixed the fuel, pour it into the tank and you’re good to go.

What is the model number on a 1980 Johnson outboard?

The nameplate should contain a model number and a serial number. The model number will identify the year and certain details of that motor. 1980-Present: Johnson outboards from 1980 to present use a model number that will indicate the year & features of that motor. See the model number codes here.

What is the fuel / oil mixture for my Johnson or Evinrude Motor?

What is the Fuel/Oil mixture for my (Johnson or Evinrude) motor? Please note that some Johnson and Evinrude Owners Manuals mention 100:1 mixture ratio after the motor is completely broken in, but most experts suggest against doing that. Stick with 50:1 for the 1964 and newer motors.

Navigation