What is the blue light on my HRV?

What is the blue light on my HRV?

When it’s blue, it means the coolant temperature in your Honda HR-V is low. What you should do: If the light is red, drive slowly and pull over as soon as you can to prevent the engine from overheating. If the light is blue, let your vehicle idle until the engine warms up and the symbol disappears.

How do I stop my HRV filter from blinking?

Re: Resetting Flashing Filter Light On Hrv

1. Turn off control panel using the POWER button.
2. Hold down arrow pointing down for 8 seconds until a 02 comes up where the roof temperature should be (a 01 comes up first but keep holding until the 01 changes to a 02 – don’t let go when you see 01).

How do you reset the tire pressure light on a Honda HRV?

Scroll to the vehicle Settings screen, and select it. Select TPMS Calibration….Models with steering wheel buttons:

1. Press MENU.
2. Select Customize Settings.
3. Select TPMS Calibration.
4. Select Initialize.
5. Select Yes.
6. Press MENU to exit.

When does the low coolant level warning light go out?

When you start the engine, the low coolant level light should come on for a second or two and then go out. If it doesn’t go out, either the coolant level is too low or there is a problem with the sensor system.

What should coolant level be on 2016 Honda HRV?

Checking the engine coolant (also known as antifreeze) level in your 2016 Honda HR-V is pretty easy. In order to get an accurate reading, your 1.8 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter.

What to do when Red Engine coolant light comes on?

To avoid potentially significant engine damage, it’s important that immediate action is taken if the red engine coolant warning light comes on. Car engines are kept cool by use of water that constantly circulates around the hot engine components. This water (or ‘coolant’) consists of a mixture of antifreeze and water.

Why do you put antifreeze in the coolant reservoir?

When you pour 50 / 50 ration of antifreeze and water (or a pre-made solution) into your coolant reservoir, this mixture forms the coolant. The benefits of using coolant over plain water this is that it lowers the freezing point of the liquid.

When you start the engine, the low coolant level light should come on for a second or two and then go out. If it doesn’t go out, either the coolant level is too low or there is a problem with the sensor system.

To avoid potentially significant engine damage, it’s important that immediate action is taken if the red engine coolant warning light comes on. Car engines are kept cool by use of water that constantly circulates around the hot engine components. This water (or ‘coolant’) consists of a mixture of antifreeze and water.

When you pour 50 / 50 ration of antifreeze and water (or a pre-made solution) into your coolant reservoir, this mixture forms the coolant. The benefits of using coolant over plain water this is that it lowers the freezing point of the liquid.

What does a crack in the coolant light mean?

Your coolant light might be signs of a more major engine problem. When you get a crack in the block or the intake gasket you will leak coolant and oil, usually slowly at first. You may not notice the difference at first, thinking that your tank is full. A repair to a cracked engine block or head gasket is an expensive repair.