What is the alternator on a Nissan Quest?

The alternator is the heart of the electrical system on your vehicle and provides not only charging for the battery but also power to the lights, ignition system and other parts of the van.

What’s the best way to remove and replace an alternator?

Follow these simple, step-by-step instructions for removing and installing an automobile alternator with common tools. Includes advice on the correct wiring as well as testing and troubleshooting tips. Sponsored by BBB Industries – makers of premium alternators and starters that meet or exceed OE form, fit and function. http://www.BBBind.com

How do you connect a serpentine belt to an alternator?

Turn the tensioner clockwise using a socket and ratchet placed on the bolt in the center of the tensioner pulley. Slide the serpentine belt off the alternator pulley and leave it laying on the other pulleys. Locate the wiring harness connector on the rear of the alternator.

Is it time to replace the alternator in my Nissan Quest?

If you have noticed that the battery on your Nissan Quest is not staying fully charged or maybe the alternator light on the dash has been coming on, it may be time for a new alternator.

What to do if your alternator is bad?

The alternator is the heart of the electrical system on your vehicle and provides not only charging for the battery but also power to the lights, ignition system and other parts of the van. If you suspect the alternator is bad, removing it and taking it to an auto parts store for testing is a good idea.

How do you remove the serpentine belt from an alternator?

Record the radio presets if you want to re-enter them when the job is complete. The serpentine belt will also need to be removed. Locate the belt tensioner and hold reverse tension against it using a wrench, socket or breaker bar. This will allow the belt to be removed from the alternator pulley.

How long does it take to replace an alternator in a car?

This most likely means the alternator has gone out and needs to be replaced. This is a common problem for most vehicles and you can replace it in about an hour.

The alternator is the heart of the electrical system on your vehicle and provides not only charging for the battery but also power to the lights, ignition system and other parts of the van.

Can a GM alternator be swapped with a Ford alternator?

This list of alternators will help you determine what alternators will interchange with each other on GM, Ford, and Chrysler vehicles. This should help you find the best alternator to use when upgrading to a higher amperage alternator. The alternators contained in each row will have the exact same mounting configuration.

Where is the alternator located in a car?

Park your vehicle on level ground with the engine off with the emergency brake set. Use basic tools while wearing eye protection and gloves. Locate the alternator under the hood, it will be near the front of the engine either on top or the bottom. If needed raise the vehicle using a floor jack and secure it with jack stands.

How big of a bolt do you need for an alternator?

Torque the upper mounting bolt to 21 foot-pounds and the lower bolt to 62 foot-pounds using a torque wrench. Connect the alternator wiring harness connector to the alternator, making sure it locks in when you insert it into the plug.

Navigation