What is a transmission filter?
The filter is a key part of the transmission system, designed to prevent metal shavings from the gears, and other dirt and debris, from contaminating the transmission fluid. It sits between the transmission pan (that collects excess fluid) and the tube that regulates the transmission fluid pressure.
How important is it to change transmission filter?
Your transmission filter is a very important component in your vehicle, because it’s the front line of defense when it comes to keeping contaminants out of your transmission fluid. Most automobile manufacturers recommend a transmission filter change every 2 years, or every 30,000 miles (whichever comes first).
How to change the transmission fluid and filter?
How to change automatic transmission fluid and filter Step 1: Transmission fluid drains better at operating temperature, so let your car idle for a few minutes first. After… Step 2: Gradually loosen the other bolts, which should allow the pan to tilt and begin to drain. Once all bolts are… Step …
How do I change the transmission filter on a Hyundai?
Unfasten the four mounting screws using a standard screwdriver and remove the filter. Install the new filter and secure it with the four mounting bolts but do not over tighten. Thoroughly clean the oil pan and the transmission gasket surface. Use a new gasket for the oil pan.
When to change the transmission fluid on a ZF?
In most, if not all other vehicles that have the 8 speed ZF transmission, the manufacturer recommends a transmission fluid and filter change at 70,000 to 80,000 miles. This is also the interval that ZF themselves recommend.
How to remove transmission fluid from transmission pan?
1 If the transmission pan has a drain plug, remove the plug to drain the fluid into a collection pan. Use a pan that can… 2 If you need to remove the entire transmission fluid pan, unscrew the two upper-most bolts halfway, then unscrew the… More …
How do you change the filter on a transmission?
Changing the fluid and filter is a quite messy and time-consuming job because few transmissions are equipped with a drain plug. That means the only way to reach the transmission filter and allow old fluid to escape is by removing the transmission pan.
How to change transmission fluid and filter Mobil?
The filter contains fluid, so keep the drain pan underneath. Step 5: Install the new transmission filter, making sure that its O-ring seats in the appropriate orifice. Step 6: Attach the new gasket to the pan with oil-soluble grease –not gasket sealer or adhesive.
How do you drain fluid from transmission filter?
Drain the fluid by loosening the pan. Select the correct transmission filter replacement based on pan shape and prepare a large pan to catch the fluid. Then loosen each pan bolt a turn or two and loosen one corner more than rest. Drain mostly from this corner.
Why does a transmission filter need to be clean?
The transmission filter functions as a sieve to collect contaminants like dirt and debris before sending lubricating fluid to the transmission itself. Over time, bits of metal that have flaked off from metal-to-metal contact and other grit and grime can dirty a transmission filter.