What is a M969?
M969. The M969 tank semitrailer is used mainly for automotive refueling. It has a four-cylinder diesel engine-driven, 4-inch centrifugal, self-priming, low-head pump assembly. It has a stainless steel, single compartment tank that holds 5,000 gallons, plus 3 percent capacity for expansion.
How many gallons does army fuel tanker hold?
The Oshkosh Defense® HEMTT A4 fuel servicing truck, or tanker, is specifically designed to transport 2,500 gallons (9464 L) of gas, diesel or jet fuel to Forward-Arming and Refueling Points (FARP).
How large is a tanker truck?
These are ISO-compliant dimensions. Front axle weight (FAW) tankers trucks typically have a length of 39.03 feet, a width of 8.2 feet and a depth of 11.15 feet. These tanker trucks typically have a tank volume between 396 gallons and 792 gallons.
How much does an R 11 refueler cost?
Essentially, it does both things that two separate vehicles do.” The new Isometrics R-11 Refueling Unit is more cost efficient, costing approximately $40,000 per truck compared to the current refueling units in use. Currently, there are plans to distribute around 150 trucks Air Force-wide.
How much can a M977 Hemtt lift?
Vehicle is equipped with material handling crane with 6,000 pound (2,722 kg) load capacity at 18.2 foot (5.5 m) boom radius, 60,000 pound (27,215 kg) recovery winch, and equipment body with 10 stowage compartments.
How much does a M978A4 weight?
64,000 pounds
M978A4 Tanker: GVWR: 64,000 pounds (72,500 with armor) Bulk fuel capacity: 2,500 gallons.
How much do tanker truck drivers make?
Tanker Truck Driver Salary in the United States How much does a Tanker Truck Driver make in the United States? The average Tanker Truck Driver salary in the United States is $72,205 as of September 27, 2021, but the salary range typically falls between $63,657 and $81,824.
How much fuel does a tanker use?
There are also medium-sized tanker trucks which can usually carry around 5,500 gallons. Smaller tanker trucks typically carry a load of 2,500 gallons in the UK or 3,000 gallons in the US. So-called “baby” tankers are also in operation which can carry up to 1,800 gallons of fuel.
How much does an r11 weigh?
There are currently three models of the R-11….R-11 Refueler.
| R-11 Refueling Vehicle | |
|---|---|
| Dimensions | |
| Curb weight | 40,000 lbs (Empty)70,000 (Full) |
| Chronology | |
| Predecessor | R-9 |
What guns do the Air Force use?
Weapons
| Name | Type | Used by |
|---|---|---|
| Aircraft guns | ||
| GAU-8 Avenger | Seven-barrelled Rotary cannon | A-10/OA-10 Thunderbolt II |
| GAU-22/A | Four-barrelled Rotary cannon | F-35 Lightning II |
| M61 | Six-barrelled Rotary cannon | F-15 Eagle F-16 Fighting Falcon F-22 Raptor B-52 Stratofortress |
Is the M969 a self loading or unloading tank?
The M969/M969A1 is a self loading and unloading tank semi-trailer designed to carry and dispense fuel to other vehicles at Forward Arming and Refueling Points. The M967/M967A1 is similar but it is designed to only carry bulk fuels between fuel terminals and depots and is not equipped to dispense fuel to other vehicles.
Who is the manufacturer of the M969 fuel tanker?
Just check the information on the separator data plates (highlighted by the yellow boxes below). The old model fuel/water separator was manufactured by Eastern Technologies. The M969A3 and M969A3P1 fuel tankers will only have the new model separator, NSN 4330-01-524-9490, which is manufactured by M.E. Industries.
Is the M970 the same as a M967?
The M967/M967A1 is similar but it is designed to only carry bulk fuels between fuel terminals and depots and is not equipped to dispense fuel to other vehicles. All models of the M970/M970A1, M969/M969A1 and M967/M967A1 share a common basic chassis, motors, etc.
What kind of separator is on m969a3 fuel tanker?
The M969A3 and M969A3P1 fuel tankers will only have the new model separator, NSN 4330-01-524-9490, which is manufactured by M.E. Industries. The fuel tankers listed in the following table could have either the old or new model fuel/water separator installed.