What happens if they use a different thickness of fuse wire?
The resistance of a conductor is proportional to its length and inverse proportional to its cross-sectional area. So, If the fuse wires are thick, the larger cross section decreases the resistance across the fuse wire. So, even a high current flows through the fuse, it doesn’t blow out.
Can I use a different size fuse?
Do not replace a blown fuse with one that has a higher amperage rating. The fuse has a specific amperage rating because it is intended to be the weak link in the circuit to protect the electrical components. A blown fuse indicates excessive current has entered the circuit.
Can you replace a smaller fuse with a bigger fuse?
CAUTION! Never replace a blown fuse with a higher-amp fuse. Always replace the fuse with one with the specified amp rating. You may install the next-smaller-rated fuse to get you by in a pinch until you can purchase a replacement.
Which fuse wire is thick 5a or 15a?
The wire A with 15 A rating is thicker. It is because, thicker the wire, less is the resistance and hence it can carry more current.
What happens if a thick copper wire is used as a fuse?
Copper has a higher melting point than the tin used in fuse wire. So, when a high level of current runs through copper wire, it continues to heat but will not melt. Instead, it causes a short circuit – potentially ruining your appliance and sparking a fire.
What happens if I use a bigger fuse?
What happens if I use a bigger fuse than needed? By putting in a higher voltage fuse, it takes more to blow that fuse, which could result in the wires getting hotter/melting/starting on fire. Unless you change the wiring, just leave the voltage of fuses alone and replace a 5v with a 5v.
What happens if you use the wrong size fuse?
Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.
How do I choose a fuse size?
How to Choose the Right Fuse
- Identify the type of voltage that is being protected.
- Observe the amperage of the electrical circuit that the fuse will be protecting.
- Size the fuse to its particular holder.
- Inspect the fuse for internal element replacement.
- Use a fuse that has an inspection window.
What happens if I put in a smaller fuse?
Do not use a fuse with a lower rating– don’t put a 20 amp fues in a 30 amp circuit–because it probably will blow prematurely. Conversely replacing a 20-amp fuse with one rated at 30 amps is dangerous because it may not blow soon enough and damage an electrical component or start a wiring fire.