What fluids does a Jeep Wrangler need?
Jeep Wrangler JK Fluid Capacities
| Component | Quantity | Fluid Type |
|---|---|---|
| 3.8L Engine Oil | 6 Quarts / 5.7 Liters | 5w-20 |
| 3.6L Engine Oil | 6 Quarts / 5.6 Liters | |
| Brake Fluid | Fill to Full Mark | DOT 3 |
| Clutch Fluid |
How much transmission fluid does a 2017 Jeep Wrangler take?
Expect to need about 4 quarts, but do not overfill.
What type of oil does a 2017 Jeep Wrangler take?
The 2017 Jeep Wrangler has a 3.6 L V6 engine that should be usinG5W-20 Synthetic Motor Oil in all temperatures. The capacity for the vehicle iS5. 9 quarts with a filter and the torque for the drain plug is 20 ft/lbs.
What kind of fluid does a Jeep Wrangler use?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type Clutch Fluid Fill to Full Mark DOT 3 Power Steering Reservoir Fill to Full Mark ATF 4 3.8L Cooling System 13 Quarts 50/50 Antifreeze/Water Mix 3.6L Cooling System (2013-2018) 10.5 Quarts 50/50 Antifreeze/Water Mix
What kind of oil does a 2017 Jeep Wrangler use?
The 2017 Jeep Wrangler’s oil type is SAE 5W-20 full synthetic. The oil capacity for the 3.6L V6 engine is 5.9 quarts with a filter.
What does W mean on a Jeep Wrangler oil rating?
The “w” in the viscosity indicates the oil’s viscosity in winter temperatures. Generally, a faster flowing oil in colder temperatures is desirable because this means more internals get oil at startup faster than a slower flowing oil, reducing wear and tear on your engine. In terms of gear oil, you’ll see ratings like GL-3 and GL-4.
How many liters does a Jeep Wrangler have?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type Dana 30 Axle 2.1 Pints / 1.0 Liters 80w-90 Dana 35 Axle 3.5 Pints / 1.7 Liters 80w-90 Dana 44 Front Axle 2.7L / 1.3 Liters 80w-90 Dana 44 Rear Axle * 4.75 Pints / 2.25 Liters 80w-90
The 2017 Jeep Wrangler’s oil type is SAE 5W-20 full synthetic. The oil capacity for the 3.6L V6 engine is 5.9 quarts with a filter.
Note: To check the transmission fluid level on 2012 and later models with the NAG1 transmission, and models with the 42RLE transmission but no dipstick, a special dipstick (part no. 9336A) will be required. It can be purchased from many auto parts stores, or online.
When to change transmission fluid in Jeep Wrangler?
At the specified time intervals, Haynes reccomends 30,000 miles or 2 years, the transmission fluid should be drained and replaced. Since the fluid will remain hot for hours after driving, perform this procedure only after the engine has cooled down completely.