Menu

Navigation

What does turn on fuse switch mean Hyundai Santa Fe?

Posted on by Arif Clayton

What does turn on fuse switch mean Hyundai Santa Fe?

Turn on “FUSE SWITCH” This warning message illuminates if the fuse switch on the fuse box is OFF. It means that you should turn the fuse switch on.

What to do if your Hyundai Santa Fe wont start?

If you do not hear the pump at all check ECU B+ 15 Amp fuse (hot at all times) and the fuel pump relay, if good suspect that you have a defective fuel pump. Make sure spark plug wires are plugged correctly. Good luck. 19 people found this helpful. Alfonso…. you seem to know a lot about cars. I need help with my 2004 Hyundai Santa Fe. Please!!

When does a Santa Fe starter go bad?

When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Santa Fe, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Santa Fe to crank, but not start.

What happens when there is no spark in the engine?

When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more.

What is the code for the Hyundai Santa Fe?

The code in the computer after failure should be P1690 or P1693 (or both). After changing the antenna piece near the ignition (180$ at the dealer), the icon shows up and car starts every time…. been around 50 times to far and no issues. Hope this helps 75 people found this helpful. this sounds so similar to whats happening with our 02 santa fe.

If you do not hear the pump at all check ECU B+ 15 Amp fuse (hot at all times) and the fuel pump relay, if good suspect that you have a defective fuel pump. Make sure spark plug wires are plugged correctly. Good luck. 19 people found this helpful. Alfonso…. you seem to know a lot about cars. I need help with my 2004 Hyundai Santa Fe. Please!!

When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Santa Fe, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Santa Fe to crank, but not start.

When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more.

What does turn on Fuse switch mean Hyundai Santa Fe?

Posted on by Arif Clayton

What does turn on Fuse switch mean Hyundai Santa Fe?

Turn on “FUSE SWITCH” This warning message illuminates if the fuse switch on the fuse box is OFF. It means that you should turn the fuse switch on.

Does Hyundai Santa Fe have heads up display?

The new Hyundai Santa Fe features the segment’s largest digital instrument gauge cluster, a 12.3-inch setup that incorporates every piece of important driving information right within your line of sight. And if you opt for a Santa Fe with Heads-Up Display (HUD), you get even more bang for your wisely spent buck.

What happens when you lock the door on a Hyundai Santa Fe?

After locking the door by pressing the lock button on the transmitter, if you press the lock button again within 4 seconds, the warning sound will operate once to indicate that all doors are locked. If this item is checked, the headlamp delay and headlamp welcome function will be activated.

How to deactivate horn feedback on Hyundai Santa Fe?

The Horn feedback operation will be deactivated. After locking the door by pressing the lock button on the transmitter, if you press the lock button again within 4 seconds, the warning sound will operate once to indicate that all doors are locked. If this item is checked, the headlamp delay and headlamp welcome function will be activated.

How to turn on welcome light on Hyundai Santa Fe?

If this item is checked, the welcome light function of the puddle lamp will be activated. If this item is checked, the lane change signals will blink 3 times when the turn signal lever is moved slightly. Convert the temperature unit from °C to °F or from °F to °C.

What is welcome sound function on Hyundai Santa Fe?

Convert the temperature unit from °C to °F or from °F to °C. If this item is checked, the welcome sound function will be activated. If this item is checked, the shift indicator function will be activated.

What are the warning signs on a Hyundai Santa Fe?

This warning message illuminates if you start the engine when the steering wheel is turned to more than 90 degrees to the left or right. It means that you should turn the steering wheel and make the angle of the steering wheel be less than 30 degrees.

If this item is checked, the welcome light function of the puddle lamp will be activated. If this item is checked, the lane change signals will blink 3 times when the turn signal lever is moved slightly. Convert the temperature unit from °C to °F or from °F to °C.

The Horn feedback operation will be deactivated. After locking the door by pressing the lock button on the transmitter, if you press the lock button again within 4 seconds, the warning sound will operate once to indicate that all doors are locked. If this item is checked, the headlamp delay and headlamp welcome function will be activated.

After locking the door by pressing the lock button on the transmitter, if you press the lock button again within 4 seconds, the warning sound will operate once to indicate that all doors are locked. If this item is checked, the headlamp delay and headlamp welcome function will be activated.

Posted In Q&A