What does the warning light on a Toyota Land Cruiser mean?
Refuel the vehicle. A buzzer sounds and the warning light comes on and flashes to indicate that the master warning system has detected a malfunction. *1:Open door warning buzzer: The open door warning buzzer sounds to alert one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]).
How do you turn off the brake light on a Toyota Land Cruiser?
The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Land Cruiser is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic.
What do the buzzers on a Toyota Land Cruiser mean?
*1:Open door warning buzzer: The open door warning buzzer sounds to alert one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). *2:Driver’s seat belt buzzer: The driver’s seat belt buzzer sounds to alert the driver that his or her seat belt is not fastened.
What does the master warning light on Toyota mean?
Master warning light A buzzer sounds and the warning light flashes to indicate that the master warning system has detected a malfunction. Seat belt reminder light Warns the driver and/or front passenger to fasten their seat belts.
How to reset the T Belt warning light?
T-BELT WARNING RESET COMPLETION a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch. b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.
How to reset timing belt on Toyota Landcruiser?
This is tutorial on how to reset timing belt on Toyota Dyna / Toyota Landcruiser (Same procedure for both). 1. T-BELT MODE DISPLAY b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds. c) Release the trip switch, then press the switch again within 5 seconds. d) The digital display should change to T-belt mode.
When does the door open warning light go out?
Door open warning light won’t go out. The door open warning light continues to glow when the car is off or running. It comes on brighter when a door is open and goes dim when the door is closed,but won’t go out. I checked all of the doors and pushed in all of the sensor buttons to see if I could isolate it to a door, but nothing.
Why does my Toyota door light go out when I open the door?
When the door is open, the button is allowed to spring out inside the switch, completing the circuit. Sometimes the switches get a bit rusty on the backside, allowing the switch to complete the circuit when it shouldn’t. Remove each switch by removing the 10MM bolt and pull the switch just slightly out from the door area.