What does the p1125 code on a Chevrolet mean?
The APP sensor 2 signal voltage is low at rest and increases as the pedal is depressed. When the control module detects that the APP sensor 1 and the APP sensor 2 signal circuits are out of correlation with each other, DTC P1125 sets. Need more information on how to fix the P1125 CHEVROLET code?
What are the diagnostic codes for a Chevy?
1 Refer to our Generic OBD II code list for definitions on all other Chevy diagnostic trouble codes. 2 Manufacturer Specific Codes 3 P0342 4 P1031 5 P1032 6 P1105 7 P1106 8 P1107 9 P1108 10 P1109
Where to find diagnostic code for Buick check engine light?
1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3. Follow scan tool manufacturer’s operating instructions to access the Diagnostic Trouble Codes (DTC’s).
What is the oxygen sensor code for a Chevy?
P1137HO2S Bank 1 Sensor 2 Lean Or Low Voltage – Read Our Article On Oxygen Sensor CodesFor Help With This Chevy Trouble Code P1138HO2S Bank 1 Sensor 2 Rich Or High Voltage – Read Our Article On Oxygen Sensor CodesFor Help With This Chevy Check Engine Light Code
The APP sensor 2 signal voltage is low at rest and increases as the pedal is depressed. When the control module detects that the APP sensor 1 and the APP sensor 2 signal circuits are out of correlation with each other, DTC P1125 sets. Need more information on how to fix the P1125 CHEVROLET code?
How much does it cost to repair a p1125 Chevy?
The cost to diagnose the P1125 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What’s the throttle body plausibility of p1125?
Click to expand… After running the codes, the mechanic found just one: P1125, Throttle Body Plausibility. It was a one-time occurrence and the guy drove the car about 40 miles without any issues. What do you think? Click to expand…
What is the fault code for accelerator pedal?
OBD II fault code P1125 is a manufacturer-specific trouble code that is defined by carmaker GM as “Accelerator Pedal Position Sensor Fault”, or, sometimes as “Accelerator Pedal Position (APP) System”, and is set when the PCM (Powertrain Control Module) detects a miscorrelation between-
The cost to diagnose the P1125 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
Which is the diagnostic code for a GMC check engine light?
1 Refer to our Generic OBD II code list for definitions on all other GMC diagnostic trouble codes. 2 Manufacturer Specific Codes 3 P1031 4 P1032 5 P1105 6 P1106 7 P1107 8 P1108 9 P1109 10 P1111
Where is the trouble code on a GMC?
When retrieving GMC trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.
When retrieving GMC trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.
How much does it cost to repair a p1125 sensor?
Check for damaged components and look for broken, bent, pushed out, or corroded terminals. The cost of diagnosing the P1125 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
How to test the GM accelerator pedal position ( app ) sensor 1?
This test tutorial will help you diagnose a Accelerator Pedal Position (TP) Sensor 1 Malfunction diagnostic trouble code in a step-by-step manner using only a multimeter. If you’ve done any type of research (before finding this tutorial), you probably already know that: