What does the p0011 Hyundai engine code mean?
Valve Timing Control (VTC) harness is open or shorted circuit. Valve Timing Control (VTC) circuit poor electrical connector Incorrect timing Engine mechanical problems Damaged Engine Control Module (ECM) What does this mean? First diagnose P0011 HYUNDAI code Check the “Possible Causes” listed above.
What are the p00xx OBD-II Diagnostic Trouble Codes?
This is the listing of P00xx OBD-II diagnostic trouble codes (DTCs). They all start with P00 (e.g. P0022, P0093, etc.), the first letter P designates they are powertrain related codes, the next digits 00 indicates they are fuel & air metering and auxiliary emission control related codes.
What is the fault code for a Hyundai?
P0244 Turbocharger/Supercharger Wastegate Sol. ‘A’ Range/Performance P0245 Turbocharger/Supercharger Wastegate Sol. ‘A’ Low P0246 Turbocharger/Supercharger Wastegate Sol. ‘A’ High
Are there any OBD-II powertrain trouble codes?
The codes below are considered generic because they apply to all OBD-II makes/models of vehicles, although specific diagnosis repair steps may vary. We have literally thousands more codes listed on the site, use the links below to go to the other code listings.
Are there any problems with the 2011 Hyundai Elantra?
The 2011 Hyundai Elantra has 572 problems & defects reported by Elantra owners. The worst complaints are engine, fuel system, and transmission problems.
What happens if your Elantra loses power while driving?
Engine will still run, just won’t perform as it should. Your local Hyundai dealer should be able to scan the ECM and pick up on a trouble code for that. My 2012 Elantra just did same thing while I was on interstate and I was run off road because I could not accelerate above 20 mph.
What are the problems with the Hyundai Elantra?
The following chart shows the 21 most common problems for 2011 Hyundai Elantra. The number one most common problem is related to the vehicle’s engine and engine cooling with 85 problems. The second most common problem is related to the vehicle’s air bags (73 problems). Table 1. Common problems of the 2011 Hyundai Elantra
Where can I find the value of my Hyundai Elantra?
The term “Blue Book Value” might refer to the Kelley Blue Book value, but is often used as a generic expression for a given vehicle’s market value. You can find the market value of your 2011 Hyundai Elantra on Edmunds. You’ll need to know some basic facts about your vehicle, such as the mileage, condition, option packages and trim level.
What kind of engine does a 2011 Hyundai Elantra have?
Used 2011 Hyundai Elantra Engine. The only engine offered in the 2011 Hyundai Elantra is a 1.8-liter four-cylinder that produces 148 horsepower and 131 pound-feet of torque.
What kind of wheels does the Hyundai Elantra have?
The 2011 Hyundai Elantra looks sporty, with a sculptured fascia and an aggressively sweeping shoulder line. Competitors offer less-flashy styling, giving the Elantra sedan a leg up in terms of aesthetics. The GLS rides on 15-inch steel wheels while 16-inch alloys are optional.
What is the fault code for the Hyundai Elantra?
Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.
Why is the Hyundai p0505 idle air control system not reset?
If the P0505 Hyundai code doesn’t reset, replace the IAC. It is internally shorting one of the IAC circuits. If the code DOES return after unplugging the IAC and starting the engine, then you know it isn’t the IAC motor. Visually check the wiring harness all the way back to the PCM.
What kind of engine codes does a Hyundai have?
This list contains more than the Hyundai Check Engine Codes. Here you will find Hyundai ABS, Airbag, and Transmission DTC codes. P0244 Turbocharger/Supercharger Wastegate Sol. ‘A’ Range/Performance P0245 Turbocharger/Supercharger Wastegate Sol. ‘A’ Low P0246 Turbocharger/Supercharger Wastegate Sol. ‘A’ High
Why do I have a power relay code p0885?
If there is not an acceptable TCM power relay control voltage signal (battery voltage), a code P0885 will be stored and a malfunction indicator lamp may be illuminated, The TCM will also enter limp-in mode, on some models, if a code of this type is stored. What are the common causes of code P0885 ? What are the symptoms of code P0885 ?
How much does it cost to diagnose a p0885 code?
The cost of diagnosing the P0885 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. The transmission control relay is used to supply power to the solenoid pack when the transmission is in normal operating mode.
What does p0302 stand for in Hyundai Elantra?
It stands for: P0302 is certainly a cause for concern, and can be a threat to the drivability the Hyundai Elantra. The nice thing about it is that the P0302 has tracked the problem to a particular cylinder, which makes diagnosing the problems simpler than P0300, which means that the cylinders are randomly misfiring.
Why does my Hyundai Elantra have a misfire code?
Fixing P0302 should be a high priority. Unlike a lot of the OBDII codes, this code has to do directly with engine combustion. Driving with a misfire can damage that catalytic converter. Raw fuel is also passing through the cylinder into the exhaust. Mileage may suffer as well when your Elantra has P0302.