What does the OBD code on a Honda Pilot mean?
On Honda vehicles the OBD code p1399 indicates that there is a random misfire occurring in the engine. In most cases a valve adjustment will correct this issue, however a blocked passage in the EGR (Exhaust Gas Recirculation) system can also generate this same code. Valve adjustments should be performed on Honda vehicles every 50,000 miles.
What causes a flashing check engine light on a Honda Pilot?
While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Pilot’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped . If you have VVT, it may be having issues.
What causes a Honda Pilot engine to misfire?
There are other misfire related codes as well, but those are the most common ones. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Honda Pilot’s fuel system can often cause the engine to misfire. It can run too lean or rich.
What does OBD code p1399 mean on Honda?
On Honda vehicles the OBD code p1399 indicates that there is a random misfire occurring in the engine. In most cases a valve adjustment will correct this issue, however a blocked passage in the EGR (Exhaust Gas Recirculation) system can also generate this same code.
How to get the Check Engine light on a Honda?
Honda Check Engine Light Codes 1 Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash. 2 Turn the ignition on. 3 MIL will indicate DTC’s by outputting a number of flashes.
Where can I find the Check Engine Light code?
You may also retrieve Honda check engine light codes using the Malfunction Indicator Lamp (MIL), by counting the flashes as follows: 1. Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash.
Is it possible to reset the Check Engine light?
Blue jumper plug with brown and black wires. While it is possible to reset the CEL light at this time, your best option is to decipher the trouble codes provided by the system. Doing so will help you to determine if further diagnostics are needed.
What is the diagnostic code for a Honda check engine light?
Refer to our Generic OBD II code list for definitions on all other Honda diagnostic trouble codes. P1201 Cylinder 1 Misfire – Compare possible causes/symptoms for this Honda check engine light code to the Generic OBD II code P0301
Is the Check Engine light on in my Honda Accord?
This small yellow light (labeled “maintenance indicator”) is not the “check engine” light (1991 Honda Accord) How Long Can You Drive With Your Check Engine Light On? Is the car running normally?
Blue jumper plug with brown and black wires. While it is possible to reset the CEL light at this time, your best option is to decipher the trouble codes provided by the system. Doing so will help you to determine if further diagnostics are needed.
Where is the fuse on the Honda check engine light?
Gain access the interior fuse box, which is located to the left of driver’s side dash. Remove the panel cover to access your vehicle’s fuses. Use the fuse panel diagram on the inside cover to determine the location of each individual fuse. Using the fuse puller (or needle nose pliers), remove fuse 7.5A. Wait three minutes, then re-attach the fuse.