What does the code 13 on an air bag mean?
Code 13 (single flash, pause, three flashes) means that the airbag circuit has shorted to ground and Code 14 (single flash, pause, four flashes) means that the primary crash sensor circuit has shorted to ground. These codes are signaled by two flashes, a two-second pause and the number of flashes that corresponds to the second digit.
What are the trouble codes for Honda airbags?
Honda DTC Trouble Codes DTC Description 9-1 Internal SRS unit failure 9-2 Internal SRS unit failure 9-3 Faulty left front seat belt switch 9-4 Faulty right front seat belt switch
What does the code 32 on the airbag light mean?
Code 32 (triple flash, pause, two flashes) means the driver side airbag has a circuit open or with high resistance, Code 33 (triple flash, pause, two flashes) means the passenger side airbag has a circuit open or with high resistance, Code 34 (triple flash, pause, four flashes) means the driver side airbag has a shorted circuit or one with low …
What are the DTC codes for Honda SRS airbags?
Honda SRS Airbag DTC Codes. 1 Honda 1988-2002 All Models Codes: 1-1 & 1-2 open circuited Or high Resistance In Drivers Air Bag Inflator 1-3 short circuited To Another Wire In 2 Honda 2002-2011 All Models Codes: 3 Honda CIVIC, CR-V, ELEMENT & RIDGELINE Codes: 4 Honda ODYSSEY Codes: 5 Honda INSIGHT, PILOT S2000 Codes:
What happens to your airbag control module in an accident?
Send your airbag control module to MyAirbags and save time, money and not having to deal with a dealership! During an accident, seat belt retractors and tensioners are deployed and will lock up by their gas charges, similarly to how airbags are deployed in a collision.
What does the my airbag reset code mean?
Typically, these codes will indicate that there is crash data stored, airbags deployed, communication failure, a full memory, or other airbag, seat belt related issues.
What does code 22 mean on Ford airbag?
Code 22 (double flash, pause, two flashes) means the safing center output circuit has shorted to battery voltage, Code 23 (double flash, pause, three flashes) means the memory clear circuit is improperly grounded and Code 24 (double flash, pause, four flashes) means there is a system disarm failure or internal diagnostic monitor fault.
What is the code for the airbag light?
Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.
Do you need scanner to read airbag trouble codes?
Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.
What does the code on the air bag indicator mean?
If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected. These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light.
Code 22 (double flash, pause, two flashes) means the safing center output circuit has shorted to battery voltage, Code 23 (double flash, pause, three flashes) means the memory clear circuit is improperly grounded and Code 24 (double flash, pause, four flashes) means there is a system disarm failure or internal diagnostic monitor fault.
Is the SRS warning light an air bag code?
These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light. This is a computer controlled system designed to deploy one or more driver, passenger, and side airbags. How to read air bag codes ?
How do you find the airbag light code?
These codes are signaled by three flashes, a two-second pause and the number of flashes that corresponds to the second digit.
These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light. This is a computer controlled system designed to deploy one or more driver, passenger, and side airbags. How to read air bag codes ?
How does an air bag diagnostic test work?
Most cars today can do an airbag diagnostic test. The test checks to see if all the sensors and circuits of the airbag are functioning. If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected.
When do airbags need to be reprogrammed?
If the airbags did deploy, you will need to get brand new airbags, and the SRS airbag control module will need to be reprogrammed to remove all the crash data and hard codes from the accident. The impact sensors and clock spring may also need to be replaced if they suffered any damage or were melted during the accident.
Do you need to reset the airbag control module?
If there is an airbag deployment, it will need to be replaced with a new or used airbag. Airbags are not repaired and not repacked. The airbag control module however can be reset to clear crash history and then can be used again instead of purchasing a new airbag control module.