What does OBD code p0341 mean on Honda?
OBD2 Code P0341 Honda definition: This P0341 Honda code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal. The camshaft position sensor (CPS) sends a specific signal to the PCM for Top Dead Center on the compression stroke as well as signals indicating the position of the cam sensor.
What causes an OBDII code on a Honda?
P0341 HONDA Possible Causes 1 Faulty Camshaft Position Sensor 2 Camshaft Position Sensor harness is open or shorted 3 Camshaft Position Sensor circuit poor electrical connection 4 Faulty starter motor 5 Starting system circuit 6 Dead (Weak) battery
Why do I have a DTC p0341 engine light?
As a result, it stretches beyond the point where the cam chain auto-tensioner can keep up. That extra chain slack causes the valve timing control (VTC) actuator and the exhaust camshaft sprocket to lag behind, and you wind up with DTC P0341.
What is the OBD code for a Honda camshaft?
OBD2 Code P0341 Honda definition: This P0341 Honda code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal.
How to fix a Honda OBDII code p0341?
How do I fix code P0341 HONDA Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P0341 HONDA Tech Notes On the following Honda models: 2003–2007 Accord L4 2002–2010 Civic Si 2002–2010 CR-V
What does the engine light on p0341 mean?
The camshaft position sensor signal sent to the Engine Control Module(ECM) during the first few seconds of engine cranking is out of range. P0341 HONDA Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Possible lack/loss of power Engine may stall while driving P0341 Honda Description
P0341 HONDA Possible Causes 1 Faulty Camshaft Position Sensor 2 Camshaft Position Sensor harness is open or shorted 3 Camshaft Position Sensor circuit poor electrical connection 4 Faulty starter motor 5 Starting system circuit 6 Dead (Weak) battery
Why does my Mil come on with DTC p0341?
A damaged or stretched cam chain, resulting from infrequent oil changes, can cause the MIL to come on with DTC P0341 (CMP sensor A and CKP sensor incorrect phase detected). Old oil causes the cam chain to wear quickly.