What does EPS mean on a Hyundai Elantra?
December 24, 2020. 1408 likes 2713 answers. The EPS light on the dash of a Hyundai Elantra means that there was a fault detected with the electronic power steering system in Your car. Your vehicle uses an electric motor to aid in steering compared to the old hydraulic systems that were used in the past.
How do I reset the Elantra EPS light?
Turn ignition switch OFF, and turn ignition switch ON. The EPS indicator comes on for about 6 seconds. Within 4 seconds of turning the switch ON, while the EPS indicator is on, turn the steering wheel 45° to left from straight ahead driving position, and hold steering wheel in position until EPS indicator goes off.
Why is my Hyundai Elantra in power steering mode?
An analysis of warranty claims to dealers indicated that the torque sensor diagnostic logic within the EPS system may be vulnerable when the vehicles are started, resulting in an incorrect diagnostic code being set. This causes the system to default to its manual power steering mode, making it unexpectedly more difficult to steer.
Why does the EPs warning light not illuminate?
The EPS warning light does not illuminate. The steering gets heavy immediately after turning the ignition switch on. This happens as the system performs the EPS system diagnostics. When the diagnostics is completed, the steering wheel will return to its normal condition.
When does the EPs relay make a clicking noise?
When the diagnostics is completed, the steering wheel will return to its normal condition. A click noise may be heard from the EPS relay after the ignition switch is turned to the ON or LOCK (OFF) position. A motor noise may be heard when the vehicle is at a stop or at a low driving speed.
Why is there a recall on the Hyundai Elantra?
The EPS makes it easier to steer the vehicle, determining the level of steering assist required at every turn. An analysis of warranty claims to dealers indicated that the torque sensor diagnostic logic within the EPS system may be vulnerable when the vehicles are started, resulting in an incorrect diagnostic code being set.
Where is the EPs light on my Hyundai Elantra?
2010 Hyundai Elantra EPS light on steering converted to 2010 Hyundai Elantra EPS light on steering converted to manual steering mode. Recall performed 4 years ago. Issue has continued, had … read more Pete Automotive Diagnostic Spe… General auto certifications 34,486 satisfied customers My 2010 Elantra (46,000 mi) lost its power. Its power
How does power steering work on a Hyundai Elantra?
Hyundai Elantra: Electric power steering (EPS) The power steering uses a motor to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it will require increased steering effort.
When does the EPs warning light come on?
2013 Hyundai Elantra 76,000kms, EPS warning light when going 2013 Hyundai Elantra 76,000kms, EPS warning light when going over 80 Km per hr, steering gets stiff. read more camerontech
When to use tilt steering in Hyundai Accent?
When the charging system warning light comes on or the voltage is low (When the alternator (or battery) does not operate normally or it malfunctions), the steering wheel may get heavy and become difficult to control operate abnormally. Tilt steering allows you to adjust the steering wheel before you drive.