What does a check engine light mean on a Mercedes E320?

A check engine light can indicate a broad spectrum of problems with your 2005 Mercedes-Benz E320. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

Can you change the parking light on a Mercedes E320?

2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl. Turbo Diesel Change the parking light Small bulbs that burn out regularly – did you know you can replace these with LED lights? 2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl. Turbo Diesel See all videos for the 2005 Mercedes-Benz E320

How to fix a check engine light on a Mercedes Benz?

Hopefully you don’t have any serious problems with your car. If it is a Mercedes Benz you can use the search function on Mercedes Medic to see if there is an article that will show you how to fix what is wrong. Once you fix the problem then you can use your scanner again to erase or reset the check engine light.

Where is the reset button on a Mercedes E320?

Located the four buttons on the left side of the steering wheel. Look for a button on the left part of the instrument panel. This is the reset button. Press and hold it until the display shows a message saying to hold the button for three seconds to reset it. Release the reset button, then press and hold it again.

How do I reset the Check Engine light on my Mercedes?

The first way to reset a check engine light on your Mercedes-Benz is with a scanner. If you have one, simply plug it in, read the related codes, and press “clear” or “reset.” So long as the code issue has been resolved, it should go off.

How to reset service light indicator Mercedes E240?

Press the menu button (looks like 2 over lapping file folders). The service indicator now displays the CONFIRM menu. The selection marker is on STANDARD OIL. Press the menu button (looks like 2 over lapping file folders). The words SERVICE CONFIRMED appear in the multifunction display. The service indicator is now reset.

Is there a scanner that can read the Check Engine light?

iCarsoft – Multi-system Scanner i980 for Mercedes-Benz/Sprinter +OBDII. The iCarsoft 980 will only work but has more capabilities than the basic OBD II scanners listed previously. Not only can it read and reset the check engine light but it can pull the codes from the SRS / Airbag module.

Which is the best Bluetooth diagnostic scanner for Mercedes Benz?

This is OBD II Bluetooth scanner you use with your Android device. It will read generic and also manufacturer specific trouble codes. Requires that you install an app on your phone. We recommend Torque Pro app. Not only does it read the code but you can turn off the MIL, check engine light and get emission ready status.

Which is the best OBD 2 diagnostic scanner?

The iCarsoft 980 will only work but has more capabilities than the basic OBD II scanners listed previously. Not only can it read and reset the check engine light but it can pull the codes from the SRS / Airbag module.

What does the Check Engine light mean on a Mercedes E320?

The Mercedes E320 is equipped with a computer system that reads trouble codes from sensors positioned throughout the vehicle. When the “Check Engine” light illuminates on your instrument panel, you need to have the engine looked at right away by a qualified mechanic. You should have any necessary repairs done before you attempt to reset the light.

What kind of diagnostic scanner does a Mercedes Benz use?

It will scan and erase codes for the Airbag, Powertrain, Chassis, Body, Engine, Transmission and Information & Communication systems. The Carsoft 7.4 Multiplexer is designed specifically for Mercedes-Benz cars. While it can read and reset all the systems in most Mercedes-Benz models it has limited programming functionality.

What’s the best way to reset a check engine light?

In such a case, it is highly recommended to check the codes with a scanner instead. Switching the ignition on and off is also one method of hard reset without disconnecting batteries. Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step.

What to do if your Mercedes Benz check engine light comes on?

Your Mercedes-Benz expert will be able pinpoint the problem for you by connecting your Mercedes-Benz to a diagnostic scan tool. This tool will provide trouble codes stored in your electronic control system, and reveal why the check engine light came on.

Why does my engine light keep turning on?

When the gas cap is not secure, vapors from the fuel tank leak out and make your engine light turn on. Make sure you are always securing the gas cap! If the light doesn’t turn off after you have fixed that, then our service department can reset your vehicle’s computer codes. A faulty oxygen sensor is another cause for your gas light to turn on.

What does it mean when your check engine light stays off?

Once you fix the problem then you can use your scanner again to erase or reset the check engine light. If the problem has been fixed the Check engine light will stay off. If it comes back again that mean the problem has not been fixed or there is another problem.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

What does the yellow warning light on the radiator mean?

Coolant fluid absorbs the heat from your engine and disperses it through the radiator to prevent your engine from overheating. This yellow warning light will come on when coolant levels are running low, to remind you to top them up. Can I still drive with my coolant level light on?

Why does my Bas light come on in my Mercedes Benz?

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times. Turn off the engine. Restart. Brake Light Switch may cause BAS / ESP / ABS light to come on. It is the most common problem with Mercedes-Benz cars.

Why do my Mercedes Benz ESP Lights Come On?

The BAS / ESP / ABS lights is not a problem with just Mercedes-Benz ML320 / ML430 models. It is a problem that has impacted all Mercedes-Benz models. We have included the top causes that trigger these lights to come on in the section below.

Is the Check Engine light on in my Mercedes?

Has the check engine light turned on in your Mercedes-Benz C-Class, E-Class, GLA, GLC, GLE, ML, or SL? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before.

How to check check engine light on Mercedes medic?

If you want to do more research then use Search function on Mercedes Medic or any other search engine to get a better idea of the problem. On any search engine enter the manufacturer and the code you got from the scanner. For example: Mercedes-Benz P0300

Where is the OBD II scanner on my Mercedes?

Here are some of the bestselling OBD II scanners on Amazon, several of them selling for under $15. Scanner plugged into the OBD II port right under the steering wheel, above the brake and gas pedals. LocateOBD II port. Look under the steering wheel, in the drivers footwell.

Why is the check engien light on on my Mercedes?

They measure the unburned oxygen. If your Check Engien Light is on because of O2 sensor you may be getting poor fuel economy as well. The input values from the O2 sensor are used to adjust the fuel delivered to the engine. You can get O2 sensors at a fraction of dealer prices on Amazon, that will fit Mercedes Benz. Check this one here for example.

What should I do if my engine light is on?

Engine Light Is On: 2003-2009 Mercedes-Benz E320 – What to Do – 2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl. Turbo Diesel This free video provides the steps to diagnose and clear a check engine light on a 2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl. Turbo Diesel. The video also provides steps on how to read the 2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl.

What does the O2 sensor on a Mercedes Benz do?

The input values from the O2 sensor are used to adjust the fuel delivered to the engine. You can get O2 sensors at a fraction of dealer prices on Amazon, that will fit Mercedes Benz. Check this one here for example. Bad Catalytic Converter If these go bad they start to get clogged.

What should I do if my Mercedes Benz won’t start?

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

What to do with a check engine light after replacing an air filter?

After a little searching on Google, I discovered that several other folks had experienced issues with the check engine light after installing a K&N filter. Some recommend cleaning the air flow sensor, which could be covered with oil. I didn’t find any evidence of oil but decided to clean it with a spray for this purpose anyways.

Can a failed air filter cause an O2 sensor to not work?

The excess filter oil will not make it through to the O2 sensors. There can’t be enough on the filter to load up the O2 sensors. Is it a failed O2 sensor or a failed HEATER for the O2 sensor?

What to do if Mercedes check engine light is on?

1. Turn ignition to position II. All dash lights should be on. Don’t start the car. 2. Locate the OBD-II port under the dashboard. Location of OBD II port used to retrieve Mercedes-Benz fault codes. 3. Plug your OBD II scanner and let it turn on. Use an OBD II scanner to check why the Check Engine Light is ON.

What should I expect when I visit my Mercedes-Benz mechanic?

If you also notice on your dash, in addition to the activated check engine light, that you have low oil pressure or your Mercedes-Benz is overheating, you should safely pull off the road as soon as you can and shut off the engine. What Should I Expect When I Visit my Mercedes-Benz Mechanic for Diagnosis?

How can I remove an error code from my Check Engine light?

Pressing the “READ” button on the scan tool to see the error codes of the engine. You should need a pen to write down the code or codes in the order they were received for future repairs or reference if needed. Pressing the “ERASE” button on the scan tool to remove the error code.

How to reset check engine light with OBD-II?

1 Connect the scan tool to the OBD – II Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column. 2 View error codes by pressing the “READ” button Pressing the “READ” button on the scan tool to see the error codes of the engine. 3 Remove the error code

How do you reset the Check Engine light on a Mercedes?

The light is designed to come on when the vehicle passes certain mileage limits. You can reset the “check engine” light on your Mercedes within a few minutes. Insert the key in the ignition switch and turn it without starting the car. Pay attention to the display on the instrument cluster between the speedometer and the tachometer.

How to check check engine light code without turning on car?

Put the ignition key and turn and switch to “on” without turning on the car. Immediately the lights on the dash come on turn off all the frills of the automobile and then press the “read” knob on the scanner to inspect the check engine light code. The symbols will be a series of letters and numbers.

What causes the Check Engine light to come on?

In some cases, the gas cap check engine light will come on when the fuel cap has not been tightly secured. We suggest that you unscrew the gas cap and re-tighten until it clicks, then allow the gas cap check engine light up to a day to reset. A loose, broken, or missing gas cap can cause your vehicle to start jerking and lower its efficiency.

Navigation