What does a cam do for a Harley Davidson?

What does a cam do for a Harley Davidson?

By installing a cam upgrade on your Harley, you can increase horsepower or torque by essentially changing your valve timing. You’ll be letting the exhaust out and fuel/air in at very specific times. By changing this timing, you can increase maximum torque in different ranges, such as low or high.

What size motor is in a 2006 Ultra Classic?

General information
Displacement: 1442.2 ccm (88.00 cubic inches)
Engine type: V2, four-stroke
Torque: 116.6 Nm (11.9 kgf-m or 86.0 ft.lbs) @ 3500 RPM
Compression: 8.9:1

Do You need A softail on a Harley Davidson?

Here are some avenues to consider. Figure 1. Harley Davidson Softail. Skill Level – Easy for just the bars; moderate if you need new cables, brake lines, or wiring. First the seat: How do you feel on the motorcycle?

What’s the problem with the 2005 Softail Deluxe?

The 2005 Softail Deluxe’s twin-cam engine problem, is something you’ll want to avoid, according to many reviewers on the web. UltraCool says the problem with the Softail Deluxe has to do with some of its perceived cheaper components. Specifically, the plastic shoes on the cam chain wear down due to rubbing.

Is the Harley Davidson Heritage a touring bike?

This bike was meant for cruising, for taking on the long haul Rider Magazine considers the Heritage Classic to be a genuine touring motorcycle and does what the manufacturer says it will do. We would hope so, as the 2011 Heritage represented the 25th anniversary of the original.

Can you change the tail light on a Softail?

You can start with a simple bulb change to an LED or HID system. You can change out the rear tail light, which will wake the dead, along with the half-sleeping dozer in a mini-van. I personally installed an LED tail light.

When did the Harley Davidson Twin Cam Softail come out?

This new transmission mounting system, and the Softail’s solid engine mounts, are what delayed the release of Twin Cam powered Softail models until the 2000 model year. Initial planning of the Twin Cam, then code-named P-22, began in 1992.

Are there any modifications to a Harley Davidson Softail?

Almost nobody owns a stock Harley Davidson, because modifying it to be uniquely yours is almost as much fun as riding it. Even the bikes sitting at your local dealership often have already been gone over by the parts department and given Screamin’ Eagle or other upgrades. Here’s a rundown of some of the most popular mods out there for the Softail.

Do you need brackets on a Harley Davidson Softail?

Yes they take away some of the Fonda/Hopper coolness of the wind in your face, but riding eight hours like that is tiring, and the destination is sometimes worth a look. A Softail needs the brackets and mounting hardware installed. My wife never takes off her windshield off her Deluxe.

When did the Harley Davidson Twin Cam 88B come out?

In 2000 the Twin Cam 88B was introduced specifically for the Softail line, with a pair of small balance shafts mounted in the engine cases, in front of and behind the crank.

What does a cam do for a Harley Davidson?

What does a cam do for a Harley Davidson?

By installing a cam upgrade on your Harley, you can increase horsepower or torque by essentially changing your valve timing. You’ll be letting the exhaust out and fuel/air in at very specific times. By changing this timing, you can increase maximum torque in different ranges, such as low or high.

Does a performance camshaft increase horsepower?

Performance cams increase the duration and timing of the valve openings during the engine stroke, increasing horsepower and making your car accelerate more quickly.

What do high performance camshafts do?

As a rule, advancing cam timing 2 to 4 degrees helps low-speed torque and throttle response with little sacrifice in higher rpm power. Advancing the cam also helps compensate for chain stretch as the engine ages.

How do I choose a motorcycle cam?

As a general rule, cams with 220-235 degrees of duration tend to produce good low end torque. Cams with 235-250 degrees of duration tend to work best in the mid-ranges and cams over 260 degrees work best for top end power.

What do Harley cam numbers mean?

Harley cam profiles typically have an intake centerline from 98 to 108 degrees. An intake centerline of 98 is considered to be the most advanced and generally gives the most torque. A centerline of 108 will give power in the upper rpm range.

Do performance camshafts work?

Yes. Adjusting the camshafts so the cams are slightly ahead or behind will alter the engine’s performance. Advancing the timing will cause the fuel intakes to open and close earlier, which improves low-end torque. Conversely, retarding the cam will improve high-end horsepower at the expense of low-end torque.

How much horsepower does a Harley Davidson camshaft produce?

A good set of pipes, some minor upgrades to the CV carburetor, a good ignition system and the right cam can produce around 75 HP when properly tuned. In order to simplify your selection of a camshaft, the Motorcycle Performance Guide created a list of the most bolt-in camshafts for Harley-Davidsons.

Can a performance camshaft be installed on a show bike?

A cam that is installed in a show bike featured by the ‘biker’ magazines may not be part of a proven engine performance combination. When it comes to improving your bike’s performance by installing a cam, you should deal with a reputable performance shop and a proven record on improving power.

What kind of camshafts does fuel Moto use?

Fuel Moto has extensive experience with V-Twin engines and camshafts. We find these the most versatile cams on the market for late model twin cam engines.

What makes a good head cam for a bike?

The combination of carburetor, intake manifold, head design, flow characteristics, valve size, bore, stroke, compression ratio, ignition system, exhaust system and the way you are going to ride the bike all have an impact upon the best cam to select. If head work or pistons are not in your budget, then your choices are limited to bolt-in cams.