What CC is stock B series injectors?
they are all 240 cc, all b and d series with MPFI that is, im not sure what size the DPFI injectors are.
What size are GT350 injectors?
Mustang Stock Fuel Injector Sizes
| Model | EV14 |
|---|---|
| 2015-17′ V6 | 29lb/hr |
| 2015-21′ EcoBoost | 24lb/hr *Excludes HPP EcoBoost |
| 2016-21′ GT350 | 34lb/hr *Includes GT350R |
| 2018-21′ GT | 28lb/hr |
How many cc are 370z injectors?
Stock injectors are 380cc at most.
What size injectors are in a D16Y8?
Stock Honda Acura Injector Sizes
| Engine Code | Year | Stock Flow Rate (cc/min) |
|---|---|---|
| ES3 | 1985 | 180 |
| D16Y7 | 1996-1997 | 180 |
| D16Y8 | 1996-1997 | 240 |
| D16Z6 | 1992-1995 | 235 |
Are all B Series fuel injectors the same?
The plug connectors clipped in like they belonged together. Re: Are all B Series Injectors the same? OBD1 and OBD2 injectors are the same except for the plug connectors.
What size are H22A injectors?
That being said, “OBD-1” (’93-96 H22A) peak-n-hold injectors are rated at 330cc. The “OBD-2” (’97-01 H22A) saturated injectors are rated at 290cc.
Are all K series injectors interchangeable?
k-series injectors are shorter, and have narrower bodies. Also b/d/h-series injectors are the old pintle style injectors, while the k-series have a series of laser drilled holes. If you compare the 2 injectors, it should be pretty clear that they are not directly interchangeable.
What kind of fuel injectors do Turbo Z31s have?
Turbo Z31’s come with 259cc/min fuel injectors (at 37psi working pressure) from the factory. There are two styles of fuel injectors to go along with the stock rails used on the VG30ET. The early engines (84-85T and 84-86NA) had top-feed fuel injectors, and the later engines (86-89T and 87-89NA) had dual/side feed style injectors.
What kind of fuel injectors did the 84-85t have?
The early engines (84-85T and 84-86NA) had top-feed fuel injectors, and the later engines (86-89T and 87-89NA) had dual/side feed style injectors. These injectors vary in type over the years, but the important thing to consider is the injector rail type.
How manyrwhp can you put in a injector?
You will need to shave the injector connectors down slightly to get the stock connectors to fit; be sure the connectors are held securely to the injector. These injectors will get you to well over 400rwhp before they are maxed out.
Where is the pintle cap on an injector?
Pay attention to the feed type at the top of the picture below. Also, the pintle cap at the bottom/end of the injector can vary in size as well. If the pintle caps on the “new” injectors will not fit your stock seals, you should buy a set of new seals and ream them out slightly using a fine rat-tail file.