What causes an alternator to over charge at 18 volts?
You are correct, 18 volts is much too high, but an alternator can not cause over-charging unless it is assembled incorrectly with one of the brushes grounded through its mounting screw. Over-charging is caused by the voltage regulator driving the alternator too hard. There’s two possibilities for this condition.
How can I tell if my alternator is charging the battery?
Use your multimeter (if you don’t have one get one). Turn it to dc volts put your leads on your battery (with the car running), if your alternator is charging it should read from 13.5V-14.5V (thats a good charge). If your not getting a reading from there you can check your output from your alternator.
What should I do if my alternator keeps dying?
The alternator is essentially a generator and it keeps your battery charged while supplying additional electrical power for the other systems in the vehicle. If you have a new alternator and your battery keeps dying on you, then there’s definitely a problem that you’re going to need to look into.
Is it safe to turn on heated windshield alternator?
But don’t turn on the heated windshield if your vehicle has one; alternator voltage may increase to over 100V and this can be unsafe. Take a voltage reading across the battery posts. Your reading should be at least 0.5 volts above base voltage for your system to keep up with electrical system demands.
Is the alternator charging at 18 volts or 23?
Alternator charging at 18 volts, replaced alt and didn’t fix. Have read some other answers on similar problems, blue wire reads 18 volts, green wire reads.23 volts? have the same problem?
Is the alternator still running off the battery?
Now i hooked up the voltage tester to the battery with the new alternator and the car still seems to be running off just the battery (at about 12 volts).
What causes an alternator to go over base voltage?
If you are getting more than 2 volts above base voltage, most likely your alternator is over-charging the battery or the battery is faulty. Other potential problems are a faulty voltage regulator or a problem in the charging system wiring.
How can I tell if my alternator is working or not?
If you’re not 100% sure, you can use a multimeter, or a voltmeter, to check the current coming from your battery. Attach the positive lead to the positive battery terminal, that’s the red one, and then the negative leave it to the black terminal. With the engine off you should be getting a reading of 12.5 volts on your multimeter.