What causes a Kia Sportage to get a p0102?
Here are the most common causes of P0102 in the Kia Sportage. They are presented loosely in order from most to least likely: MAF Sensor Dirty – Over the course of its life, the MAF sensor will often get so covered in grime that it’ll no longer get an accurate reading.
What to do if your p0102 is thrown?
Without knowing how much air is really getting into the engine, P0102 will be thrown. MAF Sensor Wiring – Make sure to check around the MAF sensor for opens or shorts. Start by inspecting the wiring harness for obvious damage. If you don’t see any you can use a multimeter to test the wiring.
What is mass airflow sensor on Kia Sportage?
Since P0102 has to do with the Mass Airflow Sensor, which is a huge part of the Sportage’s engine combustion process metering, it is going to cause noticeable symptoms. Usually, one or more of these symptoms will occur, but it’s not uncommon to have no symptoms other than the check engine light.
What is fault code on 2013 Sportage 2.0 diesel?
I purchased a 2013 Sportage 2.0 diesel auto from a family member recently and all was great until taking it away to France. Long story but short version is we broke down on the way home and the recovery mans diagnostic showed a fault code of P0299 turbocharger underboost.
Here are the most common causes of P0102 in the Kia Sportage. They are presented loosely in order from most to least likely: MAF Sensor Dirty – Over the course of its life, the MAF sensor will often get so covered in grime that it’ll no longer get an accurate reading.
What does the p0103 diagnostic trouble code mean?
This P0103 diagnostic trouble code (DTC) means that there is a high condition detected in the Mass Air Flow (MAF) sensor or circuit.
Without knowing how much air is really getting into the engine, P0102 will be thrown. MAF Sensor Wiring – Make sure to check around the MAF sensor for opens or shorts. Start by inspecting the wiring harness for obvious damage. If you don’t see any you can use a multimeter to test the wiring.
What causes a p0103 MAF circuit to be high?
Potential causes for this trouble code may include: MAF sensor electrical harness or wiring problem (open, shorted, frayed, poor connection, etc.) Note that other codes may be present if you have a P0103.
What is the trouble code on a 1995 Kia Sportage?
TEST and ground terminals. On 1995 Sportage models, turn ignition to On, but do not start engine. On other models, start and warm engine, then run at 2,000 RPM for 3 minutes. Diagnostic trouble codes will be displayed as a series of long and short flashes on the malfunction indicator lamp (MIL).
What are the different types of Kia troublecodes?
OBD-II P0100 Mass Air Flow or Volume Air Flow Circuit P0101 Mass Air Flow or Volume Air Flow Circuit P0102 Mass Air Flow or Volume Air Flow Circuit P0103 Mass Air Flow or Volume Air Flow Circuit P0107 MAP/BARO Circuit Low Input.
What does the p0170 code on a Kia mean?
Dirty air filter, air filter housing or Mass Air Flow (MAF) sensor, or faulty MAF sensor are common causes for the P0170 code. What does this mean? The cost of diagnosing the P0170 KIA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
How much does it cost to repair a Kia p0106?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0106 KIA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
TEST and ground terminals. On 1995 Sportage models, turn ignition to On, but do not start engine. On other models, start and warm engine, then run at 2,000 RPM for 3 minutes. Diagnostic trouble codes will be displayed as a series of long and short flashes on the malfunction indicator lamp (MIL).