What bars fit on IHC?
The IHC Compression design was originally developed by Envy/Blunt Scooters. IHC Stands for Integrated Hidden Compression. It is a lighter take on the HIC Compression design. Allowing you to run standard sized steel bars and aluminum bars.
Can IHC fit oversized bars?
Answer: You might technically be able to get oversized bars to fit IHC by using the IHC shim and the HIC shim, but that would create a very unstable system. I do not recommend going with this method. If you want to use oversized bars, you need a standard fork and HIC or full-size SCS.
Are Apex Bol bars oversized?
Bar Height: 673 mm / 24.5 inches. Bar Width: 560mm / 22 inches. Material: Chromoly Steel. Outer Diameter: Oversized (34.9mm)…Grip Durability How durable the grips are.
| Colour | Black |
|---|---|
| Brand | Apex |
| Compression | SCS |
| Model | Bol |
| Bar Material | Chromoly Steel |
How tight should IHC compression be?
Next put the HIC/IHC shim on your fork and tighten it with your 5mm allen key. Tighten it to the point where it goes around about one spin when you spin the front wheel with your hand. You want your compression to be super tight if you want a dialed scooter.
Are Apex Bol bars good?
The Apex Bol Bars are one of the highest quality components on the market. These are some seriously indestructible bars!
Is HIC or IHC better?
HIC can only work with oversized bars adding to the strength of larger/heavier scooters in the market. HIC/SCS forks are thicker than IHC, adding to the overall strength.
Do you need IHC fork for apex Bol?
Apex Bol bars come in standard or oversized, so you can stay with oversized bars. If you want to go to standard diameter bars, you’ll have to change your compression system from HIC to SCS or IHC. If you have IHC forks and you want to use oversized bars, you’ll need to replace the fork with a standard (non-IHC) fork.
Can a HIC Fork fit inside an IHC Fork?
They are the same diameter (or close), so one won’t fit inside the other. However, IHC is a lot like HIC for standard diameter bars. You’ll need a tapered IHC fork to do this. Ask ScooterDad: Hi i run an ao delta complete (HIC) and i want to buy the ethic almasty bar in IHC but I’m not sure if they will fit.
What kind of bars can I use with IHC?
Standard diameter bars will work with IHC, but the need a slit. Ask ScooterDad: I have a mgp vx5 extreme complete. It has oversised bars and i want to change go stamdad Apex bol bars. Will it fit/work? If not what do i do? Apex Bol bars come in standard or oversized, so you can stay with oversized bars.
Can you run HIC with standard diameter bars?
You can’t run HIC with standard diameter bars. It’s impossible. They are the same diameter (or close), so one won’t fit inside the other. However, IHC is a lot like HIC for standard diameter bars. You’ll need a tapered IHC fork to do this.
Apex Bol bars come in standard or oversized, so you can stay with oversized bars. If you want to go to standard diameter bars, you’ll have to change your compression system from HIC to SCS or IHC. If you have IHC forks and you want to use oversized bars, you’ll need to replace the fork with a standard (non-IHC) fork.
They are the same diameter (or close), so one won’t fit inside the other. However, IHC is a lot like HIC for standard diameter bars. You’ll need a tapered IHC fork to do this. Ask ScooterDad: Hi i run an ao delta complete (HIC) and i want to buy the ethic almasty bar in IHC but I’m not sure if they will fit.
Standard diameter bars will work with IHC, but the need a slit. Ask ScooterDad: I have a mgp vx5 extreme complete. It has oversised bars and i want to change go stamdad Apex bol bars. Will it fit/work? If not what do i do? Apex Bol bars come in standard or oversized, so you can stay with oversized bars.
Do you need an oversized clamp for IHC?
If you have IHC forks and you want to use oversized bars, you’ll need to replace the fork with a standard (non-IHC) fork. You’ll also need to do one of two things: Use HIC compression with a slit in your bars and an oversized clamp