What are the specs for a Yamaha gp800r?
SPEC MAINTENANCE SPECIFICATIONS Model Item Unit GP800R CRANKSHAFT ASSEMBLY Crank width A mm (in) 72.95–73.00 (2.872–2.874) Deflection limit B mm (in) 0.05 (0.002) Big end side clearance C mm (in) 0.25–0.75 (0.010–0.030) Maximum small end axial mm (in) 2.0 (0.08) play D CARBURETORS Type…
What kind of spark plug does a Yamaha NGK use?
Yamaha Model Type Capacity Year Resistor [?] 2 2CMHS 50 1984-2002 BR5HS 2 A BR6HS 2 B 50 1984- BR5HS 2 B 1985- BR7HS
How to service a Yamaha Wave Runner gp800r?
Turn in adjusters 3 and 4 until there is slack in the cables. Align the hole a in the pulley with the hole in the cylinder. INSP FUEL SYSTEM 2. Inspect: Water separator 1 Water accumulation → Drain. NOTE: If need the water draining, remove the drain plug 2.
Where can I buy a Yamaha spark plug?
YAMAHA YAMAHA cc Model Year Regular Premium Plug Gap cc Model Year Regular Premium Plug Gap TollFree 1 800 661 9438 www.transcanimports.com Elec -65 Part # Retail Part # Retail Part # Retail Part # Retail Part # Retail Part # Retail
SPEC MAINTENANCE SPECIFICATIONS Model Item Unit GP800R CRANKSHAFT ASSEMBLY Crank width A mm (in) 72.95–73.00 (2.872–2.874) Deflection limit B mm (in) 0.05 (0.002) Big end side clearance C mm (in) 0.25–0.75 (0.010–0.030) Maximum small end axial mm (in) 2.0 (0.08) play D CARBURETORS Type…
How many spark plugs does a Yamaha outboard use?
2-Stroke Spark Plugs Two Stroke Model NGK Number Gap (mm) Gap (in) Yamaha Part Number 30 (87~02) B7HS-10 1 0.04 B7H-S1000-00-00 C30 (93~97) B8HS-10 1 0.04 B8H-S1000-00-00 40 (84 ~ 05), C40 (97 ~ 02) B7HS-10 1 0.04 B7H-S1000-00-00 C40 (89~97) B8HS 0.6 0.024 B8H-S0000-00-00
Turn in adjusters 3 and 4 until there is slack in the cables. Align the hole a in the pulley with the hole in the cylinder. INSP FUEL SYSTEM 2. Inspect: Water separator 1 Water accumulation → Drain. NOTE: If need the water draining, remove the drain plug 2.
How often should you change the spark plug gap?
The spark plug gap adjustment should not be changed more than 3 times and should not exceed .008″ in either direction. Excessive changing of the spark plug gap setting will result in weakening of the spark plug ground electrode and can lead to breakage. Also, the spark plug gap should never exceed .055″ unless pre-set by the manufacturer.