What are the screws on a Honda CB750?
Remove the eight 5mm screws holding the top/rear rail on. If reusing the screws, set them aside. If using new Allen-heads, toss these Phillips screws. Turn the carbs on their tops and remove the eight 6mm screws from the front rail (you may need a pair of Vice-grips® to loosen these).
How do you rebuild a Honda CB750 carb?
Remove all hoses from the bowls and any fuel lines from the carbs. If your bike has the vacuum-assisted petcock on it (AKA Spawn of Satan or SOS), remove it, but keep all the tubes connected to it. Start with the carbs facing down – smaller diameter ends on the table, and choke plates facing you.
How much intake does a Honda CB750 SOHC have?
K intake: 45.5 grams. K exhaust: 41 grams. K oversize 33.5 intake: 49 grams. Do not use OEM stock upper valve spring retainers with higher pressure springs and performance camshafts on 77-78 “F” super sport models. These Kibblewhite valve springs are the most common valve springs used by Honda CB750 SOHC (69-78) owners for years and years.
Can a Honda dohc-4 CB750 be rebuilt?
The purpose of this booklet is to de-mystify the 4-ganged carburetor banks used on the ’79-’83 Honda DOHCs (750cc – 1100cc). Having some basic tools, plus a few inexpensive specialty tools, a modicum of mechanical capability and common sense – you can tear down, clean and rebuild your carbs in a short weekend.
How is the shop manual for a Honda CB750 divided?
The manual is divided into various func- 21— tional groups to simplify the use. The pages for the respective groups are indexed on this pages for convenience. Each Of the groups are further divided into section l. Description, 2. Specifications, 3, Diagnosis, ‘1. Disassembly, 5. Inspection and 6. Reassembly.
How many miles does a 1979 Honda CB750K have?
I WILL BE HAPPY TO KEEP THE BIKE STORED FOR YOU FOR UP TO 60 DAYS IF NEEDED. Up for sale is an all original and one owner 1979 Honda cb750k four with 7,878 miles and a clear title.
K intake: 45.5 grams. K exhaust: 41 grams. K oversize 33.5 intake: 49 grams. Do not use OEM stock upper valve spring retainers with higher pressure springs and performance camshafts on 77-78 “F” super sport models. These Kibblewhite valve springs are the most common valve springs used by Honda CB750 SOHC (69-78) owners for years and years.
What kind of wheels do I need for a 1977 CB750F2?
Racing valve springs highly recommended with this cam. *For 1977-78 CB750F2 please check valve clearances carefully. This cam works well in the F2 with our 836cc and 915cc piston kits. Titanium retainers are also a great addition. Degree Wheels are available for just $25 with cam purchase.