What are the problems with an Eaton Fuller transmission?
Oil level too low or too high, wrong type of oil, or an operating angle of more than 12 degrees. 2. Operating consistently under 20 MPH. 3. High engine RPM. 4. Restricted air flow around transmission, due to the transmission being “boxed in” by frame rails, deck lids, fuel tanks and mounting brackets, or by a large bumper assembly.
How does fuller advantage Amt work with Eaton?
If there is a service issue, Fuller Advantage AMT uses Eaton IntelliConnect,™ a telematics-capable system that provides near real-time monitoring of vehicle fault codes, prioritizes the critical events and provides accurate and comprehensive action plans by our technical experts.
What kind of calibration does an Eaton Bezares use?
Eaton now distributes Bezares PTOs, pumps and more. Discover the new Aggressive Performance calibration for UltraShift® PLUS and Fuller Advantage® automated manual transmissions. More value from longer warranties.
What kind of transmission does fuller advantage have?
The Fuller Advantage series 10-speed automated manual transmission is available in direct drive and overdrive ratios giving you the choice to spec the correct ratio for your fleet.
How does the slave valve work on an Eaton Fuller?
The slave valve will direct air pressure through the low range 1/4″ rubber hose to the range cylinder to shift the range. There will be a brief burst of air at the slave valve as the high range side of the range piston exhausts. Likewise, when high range is selected, the air pressure in the “P” will be exhausted at the shift knob.
Why are the yoke bars on my Eaton Fuller not working?
Yoke bars binding in the bar housing as a result of cracked housing, over-torqued shift block lockscrew, sprung yoke bar, or swelled areas of the yoke bar. If hard shifting occurs only in first and reverse, the shift block detent plunger movement may be restricted.
Where does the air pressure go in an Eaton Fuller?
When the range selector on the shift knob is moved down to select low range, air pressure will flow through the shift knob to the “P” port on the slave valve. The slave valve will direct air pressure through the low range 1/4″ rubber hose to the range cylinder to shift the range.
How to troubleshoot Eaton 10 speed transmission issues?
Nefi Thanks this. Here’s a link to every Eaton transmission service manual you would ever need. There is troubleshooting instructions for different symptoms in them, including air system problems. Sounds like worst case scenario you have to pull the top plate to get to the splitter. Super_Trucker, Nefi and BoxCarKidd Thank this.
Is the high side of the Eaton RTO not engaging?
Transmission High Side not engaging. Discussion in ‘ Heavy Duty Diesel Truck Mechanics Forum ‘ started by TruckDrivin04, Nov 25, 2017 . New to the site. I am having an issue with the high side of my Eaton Fuller RTO 14613 (used), 13 speed.
What kind of warranty does Eaton transmission have?
Remanufactured in our facility with genuine Fuller parts, then performance tested and backed by at least a full one-year, unlimited mileage nationwide warranty. The standard in transmission performance, reliability and durability. Eight speeds plus two low gears provide versatility for on/off-highway and demanding on-highway applications.
What kind of transmission do you need for a Roadranger?
Please see your Roadranger Representative or OEM dealer salesperson for final specifications. Engine must be certified by Eaton for use with transmission. The most fuel-efficient heavy-duty AMT available. The most fuel-efficient heavy-duty manual transmission available.
Where can I find information on the Eaton serviceranger?
For information related to ServiceRanger, please see the ServiceRanger website at roadranger.com. The Electronic Parts Catalog utilizes a graphics viewer to display all illustrations.
Why do you need A Fuller transmission book?
This book contains information needed to cross reference most Fuller transmission models produced between 1985 and current production. It allows you to order and/or stock a Reman, New, or New Exchange Unit to meet customer requirements.
What causes hard shifting on an Eaton transmission?
Linkage problems stem from worn connections or bushings, binding, improper adjustment, lack of lubrication on the joints or an obstruction which restricts free movement. To determine if the transmission itself is the cause of hard shifting, remove the shift lever or linkage from the top of the transmission.
What does low inertia mean in Eaton Transmissions?
Low Inertia Concept: This innovative, patented design is identified in the Eaton Fuller nomenclature by the letter “L” (as in RTLO-16913A). These transmissions feature a simple mainshaft which is not splined to the auxiliary gear. This unique design eliminates the added mass, drag and inertia of the entire auxiliary section.
What causes a howling sound in a Eaton transmission?
It is caused by bearings with damaged balls or rollers, or with pitted and spalled raceways. Cracked Gear – A gear cracked or broken by shock loading or by pressing on shaft during installation will produce this sound at low speeds. At high speeds a howl will be present.
Is the Eaton 13 speed splitter a problem?
Bought a truck a few months ago with an eaton 13 speed freshly rebuilt. The problem is that it splits in gear perfectly both up and down but if I try to split it while in neutral u just hear it grinding and I can’t get it in any gear without flipping it to the low side and back up again.
What kind of transmission is Fuller manual shift?
Fuller Fuller manual-shift transmissions are legendary in their solid dependability. They’re the foundation of the fuel-efficient UltraShift® automated transmissions. Using computer-controlled shifting, Eaton’s automated transmissions are loaded with benefits.
What are the benefits of the Eaton ultrashift transmission?
They’re the foundation of the fuel-efficient UltraShift® automated transmissions. Using computer-controlled shifting, Eaton’s automated transmissions are loaded with benefits. The UltraShift transmission improves vehicle safety by making it easier for drivers to keep their eyes on the road and both hands on the wheel.
Which is the most efficient Eaton automatic transmission?
The UltraShift transmission improves vehicle safety by making it easier for drivers to keep their eyes on the road and both hands on the wheel. The latest Eaton automated transmission is the UltraShift PLUS. UltraShift PLUS is stronger, tougher, smarter and more efficient than any other automatic or automated transmission.
How big is a fuller 13 speed transmission?
Fuller® 13-Speed Transmissions MODEL CAPACITYWEIGHT*SPEEDS LENGTH** RTLO-16913A 1650 lbs.ft. [2237 Nm] 716 lbs. [325 kg] 33.1 in. [841 mm] 13 forward, 2 reverse RTLO-18913A 1850 lbs.ft. [2508 Nm] 716 lbs. [325 kg] 33.1 in. [841 mm] 13 forward, 2 reverse
When did the Eaton 18 speed Rattle start?
Discussion in ‘ Heavy Duty Diesel Truck Mechanics Forum ‘ started by Cam Roberts, Jul 14, 2019 . 18 speed eaton. Have had the truck for 2 years now and has had the noise since i got it. Just thought its time to start thinking about addressing it soon.
Is the splitter on my 13 speed truck working?
Discussion in ‘ Trucks [ Eighteen Wheelers ] ‘ started by preppypyro, May 28, 2015 . Hey there, Im having issues with my splitter on my 13 speed. The truck sat over the winter, worked perfect before it was parked, and now, the splitter isnt working.
What kind of engine does a Peterbilt truck have?
Very nice Pre-emission Peter 379 with CAT C15 475HP Engine 13 speed and 70″ Sleeper with windows. Trucks runs great and has low blow by. Don’t wait call American Truck Centers today!
What kind of emissions does a Peterbilt 379 have?
EPA standards requires emissions meet the 2006 Emissions Standards 2006 Peterbilt 379 C15 Acert 13 speed This is a nice Pete 379, the tires are in great shape. The interior is in great shape, this truck is supposed to have a rebuild on it 300,000 miles ago,…
What kind of truck is 2018 Peterbilt 379?
2018 Pete 379 short nose Cummins X15 500hp 13 speed Eaton trans Wet kit Split tank Headache rack Strobe lights 84,000 miles 4800 hours Pintle hitch set up Also selling 2018 Landoll 930… See More Details
How to troubleshoot an Eaton ultrashift plus fault code?
When troubleshooting an Inactive fault code, use the Fault Isolation Procedures to guide you to the wiring and connectors associated wi th that fault. Once PD Mode is activated, flex the wiring harness and connectors to attempt to recreate the fault.
Is the Kenworth W900 in good condition?
THE INTERIOR IS IN PRETTY GOOD CONDITION FOR THE AGE AND THERE IS NOT A LOT OF FRAME RUST. THE TRUCK WAS SOLD NEW THROUGH PACLEASE SO I COULD NEVER COME UP WITH A TITLE COPY
Where can I buy a 2000 Kenworth Truck?
1997-2000 kenworth w900 cumming m11 400 hp, 10 speed, with mtm sliding mixer unit. I have many to choice from. Call for details and pricing. I also have more trucks at sannosemixer. Com the trailers have an airdrop axle that can be removed. Auction dates: 02/09/2017 – 02/09/2017, location: phoenix, az usa, lot:246 .
What kind of tires does a 2000 Kenworth day cab have?
2000 Kenworth W-900 day cab, CAT C-15, 475 HP, 13 speed Eaton Fuller, four bag air ride, 11R 22.5 front tires, 275-80 R24.5 rear tires, 210″ wheel base, 3.90 ratio, single fuel tank, dual stacks, all aluminum wheels, air slide 5th wheel, two line wet kit, double frame.
What is the TCU for an Eaton transmission?
TCU for Eaton Fuller RTLOM-16913L-DM transmission. P/N: K-3716, Model: ETC2008A02. USED TCM FOR EATON/FULLER TRANSMISSION ETC2004A06 HARDWARE 4306455 Eaton Ultrashift ECU model ETC2008A02, p/n K-3715. USED FULLER TRANSMISSION ECU ASSY, A6111 TRANSMISSION CONTROL MODULE/ GOOD USE TAKE OUT Model: ETC20022A02 – Rev: A-7464A Off & Ready to go
What are the benefits of an Eaton automatic transmission?
Using computer-controlled shifting, Eaton’s automated transmissions are loaded with benefits. The UltraShift transmission improves vehicle safety by making it easier for drivers to keep their eyes on the road and both hands on the wheel. The latest Eaton automated transmission is the UltraShift PLUS.
What kind of transmission does a Freightliner have?
I have an Eaton 10-speed autoshift transmission and a Detroit engine in my 2001 Freightliner. I am having problems with the transmission. Some times it will not downshift below the 6th gear. It happened 4 times when I was driving a 160 miles trip.
What kind of truck is the Freightliner FL70?
1997 Freightliner FL70, 4X2 2dr Regular Cab, Utility-Service Truck, ACTUAL LOW MILES 51K 1-OWNER WATER PUMPING TRUCK UTILITY SERVICE TRUCK COMMERCIAL 2003 Freightliner FL70, Flatbed 16ft Flatbed Truck, 2003 Freightliner FL70 16ft Flatbed Truck with L6 7.2L Diesel Engine, Manual Transmission, 12,000 Create a MyTrader account for free.
What kind of transmission does an Eaton have?
It just stays in hi and will not downshift to any gear below the 6th. It always work fine again after I turn the engine off and wait about 15 minuts. The transmission is a 10-speed Eaton Fuller Autoshift. Technician: Buddy, Technician replied 11 years ago
Where is the PTO opening on a Allison Fuller?
Many popular transmissions have a PTO aperture on the side or bottom (such as an Eaton Fuller), while others may have top aperture opening (an example being an Allison RDS transmission). Many new transmissions also include provisions for Rear Mount PTOs.
Are there rear mounts for Eaton Procision PTOs?
In North America rear mounts are becoming more common due to limited access to traditional side mount openings. In partnership with our European operations, we offer a wide range of rear mounted PTOs for both foreign and domestic transmission applications.
Where can I find the Eaton transmission manual?
Eaton RTLO-18918B Transmission Service Manual ready to view or download. It will help you troubleshot and diagnose your Eaton transmission. Eaton RTLO-18918B Transmission Service Manual | e Pro Gear You will find the Eaton RTLO-18918B Transmission service manual below.
How big is a fuller 10 speed transmission?
Fuller® 10-Speed Transmissions MODEL CAPACITYWEIGHT*LENGTH** SPEEDS FR-9210B 950 lbs.ft. [1288 Nm] 592 lbs. [268.53 kg] 29.9 in. [760.22 mm] 10 forward, 2 reverse FR-14210B 1450 lbs.ft. [1965 Nm] 592 lbs. [268.53 kg] 29.9 in. [760.22 mm] 10 forward, 2 reverse
What should the oil level be on an Eaton transmission?
If the oil is not doing its job, or if the oil level is ignored, all the maintenance procedures in the world are not going to keep the transmission running or assure long transmission life. Eaton Fuller transmissions are designed so that the internal parts operate in a bath of oil circulated by the motion of gears and shafts. 1. Maintain oil level.
What kind of support does Eaton hydraulics provide?
At Eaton, it is important that we not only provide industry-leading products, but also the best support in the industry. Our customer and sales support organization is dedicated to providing our customers and partners with the information they need. EATON HYDRAULICS DIV.
How much does an Eaton Lightning series transmission weigh?
That position automatically will shift between the top two gear ratios. The shift pattern instruction label for this Lightning series transmission is available as Eaton Fuller part number 5586257. Weight 530 lbs. / 241 kg for transmissi on with SAE #1 aluminum clut ch housing.
Where is the splitter button on an Eaton transmission?
The splitter button on shift knob selects one of two available ratios in each lever po sition except the lo wer right position. That position automatically will shift between the top two gear ratios. The shift pattern instruction label for this Lightning series transmission is available as Eaton Fuller part number 5586257. Weight