What are the problems with a Pontiac G6?
Previous repair of broken shift linkage, technician left debris/tools in center console that would roll around on acceleration/deceleration. Replaced transmission due to coolant leaking in from the transmission cooler. Also replaced radiator. Transmission fluid leaking. A cooling line broke, replaced both.
How often does the clutch unlock on a Pontiac G6?
Torque converter clutch locks and unlocks about every 5 seconds while driving between 40 and 60 MPH. Mechanic said they are using a new “More viscous” transmission fluid now so that’s normal operation. At 65 MPH, TCC stays locked, as it should 252-horsepower 3.6L V6 6-speed shiftable automatic FWD
What kind of fluid does a Pontiac G6 use?
Dealer replaced entire torque converter (warranty). Torque converter clutch locks and unlocks about every 5 seconds while driving between 40 and 60 MPH. Mechanic said they are using a new “More viscous” transmission fluid now so that’s normal operation.
Do you need an automatic transmission on a Pontiac G6?
Simultaneously sporty and sensible, your G6 is an ideal sedan. Make sure that it always runs as smoothly as possible with a new automatic transmission for Pontiac G6 from AutoZone. A new transmission solves many problems such as slipping gears, which is a sign of impending transmission failure.
Key fobs didn’t work, clock on radio would constantly reset to midnight, airbag warning light comes on intermittently and various other electrical issues. Spent hundreds diagnosing and replaced BCM- didn’t resolve problem. Then mechanic checked vehicle battery- it was low and needed to be replaced- all problems resolved.
Why are the brake lights not working on my Pontiac G6?
Brake lights pop on while driving without pressing on the brake pedal. Once pedal is pushed lights will dim for about 5 seconds then brake lights will pop on again without pressing the pedal. The cruise control will not work properly at times and when it does will suddenly shut off randomly.
Why are the connectors on my Pontiac G6 corroding?
Issue being is the connectors on the BCM are corroding, you can also clean the connectors and grease it up too. Due to poor placement condensation from AC creates humidity and corrosion with the BCM. Been dealing with this issue for a few years now.
How to fix the BCM on a Pontiac G6?
Quick fix pull the BCM and lube the heck out of it with dielectrical grease. Wiggle it back into place and push it in hard. Try brakes again – if lights are still on put more grease on it. Issue being is the connectors on the BCM are corroding, you can also clean the connectors and grease it up too.