Is there an alarm on my Harley Davidson?
I managed to get one ride in before having to store the bike for approximately 2 months. The siren started going off and fob will not disable it. In one instance I even disconnected the battery while the siren was going. It did not stop for about 30 seconds.
What’s the electric starter on a Harley Davidson?
NOT HARLEY APPROVED Right at the time I turn on the Key and the off button to ON,,,, NOT Waiting for the bike to go thru the normal process ; light-pump-light off before starting. Hit starter Immediately and BAM,,,,It starts….
How often should you check your lights on a Harley Davidson?
Bulb burnout exposes a rider safety problem resulting from signals and brake lights malfunctioning. It’s risky enough to be a motorcycle rider without the risk of bulb burnout. At least once a month, check the lights of your Harley to ensure that your bulbs are in good working order.
Why do the lights keep blinking on my Harley?
The lights keep blinking and the ignition won’t turn over. It has been in storage for a year. Submitted: 11 years ago. Category: Motorcycle If you have stored the bike it may have went into storage mode. Do dissable that, turn the ignition to on and the system should flash and go CRAZY! Double click the FOB and it should disarm.
Why does my alarm go off on my Harley Davidson?
When I disconnect the battery negative cable the alarm goes off,really embarrassing.My bike is a 2003 Dyna wide glide. Steve, You need to have your key F.O.B present when disconnecting the battery.
Why does my Harley Davidson make a ticking noise?
If you are hearing an engine noise, chances are it is emanating from the valvetrain. If your are hearing an abnormal clattering or ticking noise, chances are it is a lifter. The twin cam engine uses hydraulic lifters, which are able to compensate for heat expansion and normal valvetrain wear.
What kind of engine noise does a Harley Davidson make?
A quality oil suited to the environmental conditions in which your bike is operated can greatly reduce the characteristic ticks and clatters. Many individuals will experience some form of piston slap in their Harley engines. This noise will often have a low-pitched metal to metal tapping sound as the piston rocks back and forth in the cylinder.
The lights keep blinking and the ignition won’t turn over. It has been in storage for a year. Submitted: 11 years ago. Category: Motorcycle If you have stored the bike it may have went into storage mode. Do dissable that, turn the ignition to on and the system should flash and go CRAZY! Double click the FOB and it should disarm.
I managed to get one ride in before having to store the bike for approximately 2 months. The siren started going off and fob will not disable it. In one instance I even disconnected the battery while the siren was going. It did not stop for about 30 seconds.
How to disarm the Smart Security system on a Harley Davidson?
Also, with the battery disconnected in the fob I can keep the fob in one of the bike’s bags without worrying that it’s deactivated the alarm should someone get any ideas of rolling away with it. Every once in a while I use the PIN to disarm the system to help me remember what the PIN is.
How to reset the security code on a Harley Davidson touring?
This article will show you how you can reset the security code, or override the fob on your Harley Davidson Touring. Turn the ignition switch located on the gas tank to “off,” and then turn it to “on.” Figure 1. Turn ignition switch. Press both turn signal switches together and keep them pressed.