Is the brake light supposed to be on?
Some cars have a common warning light for the brake system and the parking brake. If the dashboard light remains on, it’s telling you that thre is a brake system problem that could prevent you from stopping your vehicle. Turn off the engine and arrange to have the vehicle transported to your trusted mechanic.
What to do when brake light comes on after brake job?
Once the new pads, shims and brake hardware are installed and torqued to spec, apply firm pressure to the brake pedal with the ENGINE OFF. THE PEDAL WILL GO TO THE FLOOR! Don’t be surprised! Release the pedal and re-apply several times until you get a firm pedal. Make sure you have a firm pedal BEFORE you start the engine.
Why is my brake light not working on my new car?
New cars do often use LED lights for the taillights. But if you have an older car you want to check the light bulbs. A blown or fused bulb is the most basic reason behind a faulty brake light. If the bulb used in the brake light has gone faulty it will not work when you depress the brakes.
Why does the brake light stay on after you apply the pedal?
If you skipped the pedal apply step and now have a brake light on after brake job, simply shut off the engine and perform it now. If the pedal firms up but the brake light stays on, you’ll have to reset the pressure differential switch. The switch is located in different places on every vehicle.
Where are the brake lights on my car?
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.
Once the new pads, shims and brake hardware are installed and torqued to spec, apply firm pressure to the brake pedal with the ENGINE OFF. THE PEDAL WILL GO TO THE FLOOR! Don’t be surprised! Release the pedal and re-apply several times until you get a firm pedal. Make sure you have a firm pedal BEFORE you start the engine.
If you skipped the pedal apply step and now have a brake light on after brake job, simply shut off the engine and perform it now. If the pedal firms up but the brake light stays on, you’ll have to reset the pressure differential switch. The switch is located in different places on every vehicle.
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.