How to restore front suspension on Pontiac Firebird?
If you’re doing a frame-off restoration, remove the two bolts at the bottom of the core support, the two bolts that go through the firewall in the mounting pad, and the two bolts that attach the subframe to the cage nuts. The front suspension is the most difficult part of overhauling your suspension.
What kind of brakes did the Pontiac Firebird use?
The stock front disc and rear drum brakes used on the second-generation Firebird were extremely robust and efficient. Depending on which road test you read, the disc/drum setup on the Firebird took about 160 feet to stop from 60 mph.
Where are the bolts on a Pontiac Firebird?
Six bolts hold the front subframe to the car, and once those are removed, you can simply roll the subframe out from underneath the car.
Where is the retainer ring on a Pontiac Firebird?
Use a 3/8-inch line wrench to remove the short section of rubber brake line from the steel brake line at the bracket. A retainer ring is located at the back side of the brake line bracket. Use a flat-head screwdriver or pick to snag it and lift it out. A dust cap is at the center of the brake rotor.
When was the brake upgrade added to a Pontiac Firebird?
This bolt-on item was originally offered as optional equipment in 1979, and therefore, it does not negatively effect the collector value of a second-generation F-Body car. The brake upgrade was part of the WS6 Performance Package.
Use a 3/8-inch line wrench to remove the short section of rubber brake line from the steel brake line at the bracket. A retainer ring is located at the back side of the brake line bracket. Use a flat-head screwdriver or pick to snag it and lift it out. A dust cap is at the center of the brake rotor.
Where is the brake hose on a 1979 Pontiac Firebird?
Install the brake hose by placing one end at the caliper and installing a new copper washer, which should have been included with the new hose. Reuse the bolt you removed earlier. The 1979 model year brought a major change to the Special Performance Package (RPO WS6).
How do you remove parking brake cable on Pontiac Firebird?
Use locking pliers to grasp the end of the parking brake cable. Pull on the cable and get some slack from the cable itself so you can move the retainer ball out of the bracket. Bend and twist the retainer to the side with the opening. Remove the cable from its retainer.