How to reset the oil life on a Jeep Grand Cherokee?
How to reset the oil change life on a 2011-2017 Jeep Grand Cherokee. Jeep / Chrysler / Fiat do not have a recommended oil change interval, they use the computer to calculate when the oil should be changed. Once the oil is changed the oil life counter needs to be reset using the process in the video. Loading…
How to reset the engine oil life system?
The engine oil life system must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Change Due Light on your Jeep Grand Cherokee: If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal
How do I reset the oil change light?
If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal Turn the ignition off and start the engine to verify the indicator has been reset. Repeat this procedure, if the message still illuminates when you start the engine.
What kind of oil does a Jeep Grand Cherokee use?
Jeep integrated with the 3.6-liter V6 Pentastar engine-powered 290 hp with 8-speed automatic transmission. When engine oil needs to replace, Oil Change Required or Change Oil message will appear on the display.
How to reset oil life on Jeep Grand Cherokee?
For the newer model, the oil life system can also be reset as follows: Turn the ignition key to position “RUN” without starting the engine, If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal. Use the NAVIGATION button (located on the steering wheel) and select VEHICLE INFO
The engine oil life system must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Change Due Light on your Jeep Grand Cherokee: If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal
How does the oil change indicator work on a jeep?
The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition is cycled to the ON/RUN position.
How to do an oil change on a Jeep Wrangler?
Use the NAVIGATION button (located on the steering wheel) and select VEHICLE INFO. Find the REMAINING OIL LIFE. Finally, hold down the OK button until the “Oil Life” display changes to 100 percent. Turn the ignition off and start the engine to verify the indicator has been reset.