How to replace the drive belt on a Mazda 3?
1. Remove the plug hole plate. 2. Remove the A/C drive belt. 3. Turn the center of the auto tensioner pulley counterclockwise to release tension to the drive belt tension. 4. Remove the generator drive belt.
How to remove generator drive belt on Mazda CX 5?
5. Rotate the crankshaft pulley clockwise approx. halfway and verify that the generator drive belt is installed correctly. If the rib of the drive belt and the groove of each pulley are not aligned, remove the drive belt and re-install it.
How often do you replace the serpentine belt on a Mazda?
Reinstall the access panel cover. Reinstall the wheel and lower the vehicle. Mazda recommends that the serpentine belt is replaced every 35,000 miles. The serpentine belt may also be referred to as the drive belt, accessory belt, or the alternator/air conditioner belt.
How do you remove a belt from an alternator?
Use a 14mm socket to push the tensioner away from the belt by turning it clockwise. You will need to use a cheater bar to move the tensioner back. Remove the belt from the accessory pulleys by hand. The belt will need to come off several pulleys including, an A/C pulley, alternator pulley, and power steering pump pulley.
1. Remove the plug hole plate. 2. Remove the A/C drive belt. 3. Turn the center of the auto tensioner pulley counterclockwise to release tension to the drive belt tension. 4. Remove the generator drive belt.
How many miles does a Mazda drive belt last?
Fig1, Fig2. The Mazda has two drive belts. Fig3. A drive belt is made of long-lasting rubber-based material. In most cars, a drive belt is replaced between 40,000 and 70,000 miles, however, we have seen cases where the drive belt lasted over 100k miles.
When is a drive belt should be replaced in your car?
Most cars have one or two drive belts. When a car has only one drive belt, it might be called a serpentine belt. For example, this Ford engine in the first photo has only one drive or ‘serpentine’ belt. The car in the next photo has two drive belts.
What do you call the belt that drives the engine?
A drive belt is the part that drives all these accessories. The belt itself is driven by a pulley attached to the engine crankshaft. Most cars have one or two drive belts. When a car has only one drive belt, it might be called a serpentine belt.