How to replace the blower motor on a Honda Fit?
There are 3 screws you need remove in order to remove the blower motor. You will have to get to under the passenger dash area. Place your hand around the blower motor to locate the screw positions. Once you loosen those screws up, the blower motor falls right out. You simply unplug the old one and plug in the new one.
How do you remove a motor from a blower fan?
While holding the blower motor in place remove the last screw. After all of the screws have been undone grasp the motor and remove it from the housing. This can take some maneuvering so hang in there and be careful not to damage the fan blade (squirrel cage) against the heater plenum.
What to do if your air conditioner blower needs to be replaced?
A good HVAC company will suggest inspecting your blower motor first to ascertain whether it should be replaced. Proper inspection also allows them to determine what kind of motor is compatible with your air-conditioner and provide a more accurate quote if a replacement is needed.
How do you remove the cover from a blower?
Use the Phillips screwdriver to remove the two screws under the cover on the bottom of the blower. Set the cover aside. Use the needle nose pliers or flat head screwdriver to remove the cover on the front of the blower assembly. To do this, you must remove the tiny clip holding the cover in place.
There are 3 screws you need remove in order to remove the blower motor. You will have to get to under the passenger dash area. Place your hand around the blower motor to locate the screw positions. Once you loosen those screws up, the blower motor falls right out. You simply unplug the old one and plug in the new one.
How do you remove a blower motor from a HVAC vent?
Going headfirst into the footwell with a flashlight, look up until you locate the blower motor. Locate the three to six bolts keeping it in place, and remove with sockets and ratchet. Chances are these will be metric-size bolts The blower motor assembly should slide out, allowing you to slip off the HVAC vent connections.
Use the Phillips screwdriver to remove the two screws under the cover on the bottom of the blower. Set the cover aside. Use the needle nose pliers or flat head screwdriver to remove the cover on the front of the blower assembly. To do this, you must remove the tiny clip holding the cover in place.
How long does it take to replace a blower fan?
The problem is usually the blower motor regulator. The regulator controls the fan speed of the blower motor and can fail after many years of use. Thankfully, replacing the blower motor regulator is an easy fix, usually taking no more than an hour. In this article we will also cover the steps involved with removing the blower fan itself.