How to read Pontiac Montana service engine soon codes?
The Pontiac Montana is equipped with an OBD-II bus which is read by plugging in an OBD-II scanner. The tool is available at auto parts stores or from auto parts departments. Inexpensive units cost less than $50 and can display the code or codes that are causing your Service Engine Soon light to come on.
Why does my service engine soon light come on?
by Christopher Phillip. If your “Service Engine Soon” light has come on in your Pontiac Montana, it means that one of the sensors that monitors myriad functions of your engine, transmission, or exhaust system has recorded a parameter outside of the values that GM considers normal operation.
Can a p0449 code cause a Pontiac Montana to stop running?
While P0449 is not going to cause the Montana’s engine to stop running, it should not be treated lightly. You could have a fuel leak. Pay extra attention to your tank level and make sure you are not leaking fuel. We recommend taking it in and/or dealing with it right away.
Where is the OBD-II scanner on a Pontiac Montana?
The OBD-II port is located directly underneath the dash of your Montana on the driver’s side. It is a female connection, consisting of 16 pin holes enclosed in hard plastic. Plug the OBD-II scanner cable with the 16-pin male attachment into the OBD-II port.
The Pontiac Montana is equipped with an OBD-II bus which is read by plugging in an OBD-II scanner. The tool is available at auto parts stores or from auto parts departments. Inexpensive units cost less than $50 and can display the code or codes that are causing your Service Engine Soon light to come on.
When does the service engine soon light come on?
If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light. It does only occur when there is a problem with your engine.
Why does my check engine light not light up?
If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light.
The OBD-II port is located directly underneath the dash of your Montana on the driver’s side. It is a female connection, consisting of 16 pin holes enclosed in hard plastic. Plug the OBD-II scanner cable with the 16-pin male attachment into the OBD-II port.
What is the problem code for Pontiac check engine light?
P1113Intake Resonance Switchover Valve Circuit P1114Engine Coolant Temperature (ECT) Sensor Circuit Intermittent Low Voltage – Read Our Article on Automotive Circuit TestingFor Help With This Pontiac Trouble Code
What causes the p0171 code on a Pontiac?
The P0171 code could also be caused may be caused by one or more of the following: debris on MAF sensor causing an incorrect reading, improper oil level, low or high fuel pressure or Engine Control Temperature (ECT) Sensor reading inaccurate. There is a factory service bulletin for the following Pontiac models: 2000-2001 Pontiac Transport
What’s the trouble code on my Pontiac Montana?
A very common issue with the Pontiac Montana is the P0449 code. This trouble code is a reference number that is given to you when you plug your Montana into a OBDII scanner. P0449 deals with the evapo Skip to content
While P0449 is not going to cause the Montana’s engine to stop running, it should not be treated lightly. You could have a fuel leak. Pay extra attention to your tank level and make sure you are not leaking fuel. We recommend taking it in and/or dealing with it right away.
What does the P0300 Pontiac engine code mean?
Start by checking for intake leaks, intake gaskets are common caused of multi-cylinder misfiring. If no leak are found the next step is to replace the spark plugs. If the problem persists more tests needs to be done to diagnose problem, see “Possible Causes”. What does this mean? The cost of diagnosing the P0300 PONTIAC code is 1.0 hour of labor.
What does DTC stand for in GM OBD?
Trouble Codes› GM OBD Trouble Codes› What is a DTC? A DTC is a diagnostic Trouble Code.
Can a OBD-II scan clear a DTC?
Many OBD-II scanners have the ability to clear DTCs, which will turn off your Service Engine Soon light. This will not make the underlying cause of the DTC go away. It’s best to leave the DTCs in the Montana’s PCM until you have had your vehicle further diagnosed by a mechanic.
What is an OBD-II trouble code on a car?
What is an OBD-II Trouble Code? On-Board-Diagnostic (OBD) trouble codes are one way your vehicle communicates with a mechanic. Every car built since 1996 has an OBD computer system that monitors and identifies issues. In particular, it looks for issues that may result in harmful and polluting emissions from exhaust gases.
What does Pontiac OBD reader do for You?
Pontiac OBD reader’s enables you prevent further damage to your engine, general car performance problems and poor gas mileage. Pontiac ODB reader is one of a kind software stores information that would otherwise be important for your future use. It is a code that will enable you save costs incurred during the wear and tear on your vehicle parts.
Where do I find the trouble code on my Pontiac?
These are listed in numerical order for easy searching. When retrieving Pontiac trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
These are listed in numerical order for easy searching. When retrieving Pontiac trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.