How to press in and out a control arm bushing?
There are probably many youtubes on how to press in & out a control arm bushings… the tools you’ll need include: a ball joint puller (to get access to the control arm) a large air compressor (the larger the better, more power for your tools)
How to install new ball joints and control arm bushings?
Jack the car up enough to be able to slide underneath and place a jack stand under the frame. Slide under the car and eyeball the bushings. Have your helper yank the wheel back and forth while you watch for movement of the control arm within the bushing and pocket.
How often should you replace control arm bushings?
Although the control arm bushings in your suspension system are always putting in work, you’re not going to have to be too concerned about replacing them that often. That’s because they’re known to hold up for a very long time. In fact, you may be able to get well over 100,000 miles out of your car’s control arm bushings prior to replacing them.
How to install aftermarket control arms on a Mustang?
Aftermarket control arms for 94-04 Mustangs. Jack the car up until the wheels are approximately three to four inches off the ground. Place a pry bar or lever under the center of the tire. Lift up on the lever and tire while observing (looking and feeling) for movement in the ball joint.
When to replace control arm?
If the control arm on a vehicle is damaged in a crash or impact with a pothole or parking block, the suspension will be out of alignment and cause uneven tire wear and poor vehicle handling. The control arm should be replaced as soon as possible.
How much does it cost to repair lower control arm?
From our research, the average professional repair costs, including parts, will be in the $175 to $425 range. Keep in mind that this is the price for the control arm only and will not include additional parts if needed.
When should you replace bushings?
While there’s no set schedule, the bushings may wear out and need to be replaced as a vehicle approaches 100,000 miles. Driving aggressively or over rough roads can decrease the lifespan of the control arm bushings. On some vehicle models, the bushings are permanently installed in the control arms.
What are the symptoms of a bad lower control arm?
One of the first symptoms commonly associated with bad control arms is steering wheel vibrations. If the bushings or ball joints in the control arm become excessively worn it can cause wheel shimmy, which may cause vibrations felt in the wheel.