How to know when your pressure washer pump needs an oil change?
How to know when your pressure washer pump needs an oil change (if ever). Most residential pressure washer pumps will not require any maintenance. Your User Manual will tell you. If a pump failure occurs within the warranty period, they will replace the pump instead of repairing it.
What to do if your well pump is running out of water?
Ask your well driller for a consult about increasing well yield, drilling further, installing storage tanks or further diagnosis. Start by making sure the pump actually runs. Then check for debris or damaged pump impeller. Our well seems to be running out of water. Sonar said the water was 186 ft down.
Can a pressure washer pump be changed without tearing it down?
If the pump requires oil changes your manual will tell you. There will be a way to change the oil without tearing the pump down – the pump assembly will have a drain and fill plug/bolt. But since you’re here: I’m guessing you already know your pressure washer water pump oil needs changing…
When did the water pump change on a Ford Mustang?
Mid-way through the production run for the 2001 model year Ford changed the design of the water pump on the 4.6L engine. The older style pump produced from 1996 to mid-2001 had a longer shaft. In January of 2001 the design of the pump was changed to a shorter shaft.
Ask your well driller for a consult about increasing well yield, drilling further, installing storage tanks or further diagnosis. Start by making sure the pump actually runs. Then check for debris or damaged pump impeller. Our well seems to be running out of water. Sonar said the water was 186 ft down.
How does a one line well pump work?
It sucks air every time you turn the pump on. The pressure gauge jumps up and down. If you wait a few hours, a little water might arrive also, but otherwise it’s mostly air. And it is the one line type. 1/2 HP.
Is there an on and off pressure switch on a well pump?
In some systems, there is no simple on and off pressure switch. These systems have a pressure sensor that works with a controller to allow the pump to pump more or less in a gradual method called a “constant pressure” system.
Do you need to replace the hose clamps?
The connection clips can be a pain as they tend to break or need tightening every so often. If the clips have cracked, you can buy replacement hose clamps from your local car dealer to put around the crack to prevent the leaking. However, if the problem is coming from somewhere in the middle of the overflow hose, this will need to be replaced.