How to install a rear seat in a Hyundai Santa Fe?

Install in the reverse order of removal. 1. Remove the luggage covering met (A). 2. After loosening the mounting screws, then remove the luggage floor box (A). 3. Loosen the third row seat assembly rear mounting bolts (A). 4. Remove the third row seat track mounting cover (A). 5.

What to do with 2014 Hyundai Santa Fe XL?

No camping gear left behind with 2014 Hyundai Santa Fe XL. It was all about communing with nature, and turning one’s back on the burdens and baggage of everyday life. Reducing life’s complexities to the basics of food, shelter and a little time to think.

How big is the Hyundai Santa Fe XL?

All of this fit with ease inside the commodious cargo hold of the 2014 Santa Fe XL. Unlike its smaller sibling, the five-passenger Sport, this family hauler gets three rows of seating thanks to an added 215 mm in length and 100 mm in wheelbase.

What is towing capacity of Hyundai Santa Fe XL?

Towing capacity is 2,268 kg (5,000 lbs), which is ideal for towing the weekend toys. In the XL, all-wheel-drive also gets you Active Cornering Control. This steps up its cornering ability by applying braking to the inside rear wheel when accelerating through a turn.

Are there any problems with the Hyundai Santa Fe?

The 2014 Hyundai Santa Fe has 357 problems & defects reported by Santa Fe owners. The worst complaints are engine, accessories – interior, and brakes problems.

Where is the block heater on a Hyundai Santa Fe XL?

HI, Ok, block heaters are not installed at the factory, but rather at the dealer level.

What’s the best way to fix a Hyundai Seat belt?

The best way to fix your seat belt and restore the faith in your occupant restraint is to replace it with a brand new Hyundai unit. Your seat belts operate in conjunction with other safety restraint system items, such as the driver, the passenger and even large curtain airbags, to keep you and your passengers as safe as possible at all times!

What can safety restore do for your seat belt?

Here at Safety Restore we specialize in post-accident restorations, repairing locked & blown seat belt retractors, tensioners and buckles. Safety Restore is the leader in post-accident restoration, specializing in resetting SRS airbag modules with crash data and had codes as well as repairing locked & blown seat belt and buckle pre-tensioners.

How do you replace the second row seat in a Kia Sorento?

1. Push the second row seat assembly [RH] (A) towards the front of the vehicle as far as possible. 2. Loosen the second center seat belt buckle mounting bolt (A). 3. Push the second row seat assembly towards the front of the vehicle as far as possible. 4. Loosen the second row seat assembly rear mounting bolts (A). 5.

How do you remove the rear seat in a Kia?

If there are no bolts, you will lift the seat to remove it. If you can find no bolts, then try the following to remove the rear seat. Lift the front part of the seat to unlatch it. Move the seat cushion back towards the trunk, then lift. Install the seat in reverse order.

Are there any manuals for the Hyundai Santa Fe?

Every Manual available online – found by our community and shared for FREE. Enjoy! Based on the platform of the Hyundai Sonata, the Hyundai Santa Fe is the first SUV from South Korean auto manufacturer Hyundai. Introduced in 2001, it was at first criticized by the journalists for its obscure look, but the American buyers thought the other way.

When did the Hyundai Santa Fe come out?

Introduced in 2001, it was at first criticized by the journalists for its obscure look, but the American buyers thought the other way. The Santa Fe became a great hit for Hyundai and at times, Hyundai had trouble to meet the demand.

How to remove front seat shield on Hyundai Santa Fe?

Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. Take care not to bend or scratch the trim and panels. 1. Remove the front seat assembly. 2. Remove the front seat shield outer cover. 3. Pull up the front seat headrest (A) while pressing the locking pin (B).

How do you repair a Hyundai Santa Fe?

1. Loosen the nut holding the assist arm cam bolt (A). 2. Adjust rear toe by turning the rear assist arm cam bolt (A) clockwise or counter clockwise. Toe adjustment should be made by turning the right and left cam bolt by the same amount. 3. When completing the toe adjustment, tighten the nut to specified torque.

How to do rear wheel alignment on Hyundai Santa Fe?

When using a commercially available computerized wheel alignment equipment to inspect the rear wheel alignment, always position the vehicle on a level surface. Prior to inspection, make sure that the rear suspension system is in normal operating condition and that the tires are inflated to the specified pressure. 1.

How do you adjust the rear camber on a Hyundai Santa Fe?

2. Adjust rear toe by turning the rear assist arm cam bolt (A) clockwise or counter clockwise. Toe adjustment should be made by turning the right and left cam bolt by the same amount. 3. When completing the toe adjustment, tighten the nut to specified torque. Camber is pre-set at the factory, so it does not need to be adjusted.

Where is the transfer pump on a 2007 Hyundai Santa Fe?

2007 Hyundai Santa Fe fuel pump and transfer pump removal and location. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Is there an up and down on a Hyundai Santa Fe?

Just bought a 2013 Hyundai Sante Fe with their “MOST POPULAR UP GRADE” i.e., heated seats etc. There is no up or down adjustment to the passenger side front seat; just back and forth and seat back tilt.

How to repair a Hyundai Santa Fe floor console?

Put on gloves to protect your hands. When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. Take care not to bend or scratch the trim and panels. 1.

How to remove the front seat back cover?

Turn the front seat back cover inside out. Then pull out the headrest guides (A) while pinching the upper part of the guides, and remove them. 16. Remove the front seat back cover (A) from the front seat back frame. 17. After removing the hog-ring clips (A) on the front of seat back and remove the front seat back cover (B). 18.

What’s the difference between a Santa Fe and a GLS?

The Limited’s sunroof and audio system are optional on the GLS and SE, as are heated front seats (SE only) and a navigation system with rearview camera. The 2010 Hyundai Santa Fe gets two new engines and six-speed transmissions that deliver both better performance and improved fuel economy.

What are the safety features on a Hyundai Santa Fe?

Electronic stability control, antilock disc brakes, active front head restraints, side-impact airbags for front seat passengers and rollover-sensing side curtain airbags are all standard on the Santa Fe. In government crash testing, the 2010 Hyundai Santa Fe earned perfect five-star ratings in both frontal and side impacts.

Navigation