How to fix this p1687 code no mechanical instrument cluster Bus message?

How to fix this p1687 code no mechanical instrument cluster Bus message?

How do i fix this p1687 code no mechanical instrument cluster bus message? Anyone out there fmiliar with the fix for this please help. i have tested voltage to the bus wire yellow/violet at the harness for the cluster and it is active and reads between 0.27-0.74v also the ground to cluster is fine.

How do I fix this p1687 code no mechanical Fixya?

Anyone out there fmiliar with the fix for this please help. i have tested voltage to the bus wire yellow/violet at the harness for the cluster and it is active and reads between 0.27-0.74v also the ground to cluster is fine. In dire need to get this truck out of my hair, any help would be greatly apprechiated. thanks in advance.

What is the OBD2 code for a jeep?

OBDII Jeep Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.

How much does it cost to diagnose a p1687 code?

The cost to diagnose the P1687 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

How do i fix this p1687 code no mechanical instrument cluster bus message? Anyone out there fmiliar with the fix for this please help. i have tested voltage to the bus wire yellow/violet at the harness for the cluster and it is active and reads between 0.27-0.74v also the ground to cluster is fine.

Anyone out there fmiliar with the fix for this please help. i have tested voltage to the bus wire yellow/violet at the harness for the cluster and it is active and reads between 0.27-0.74v also the ground to cluster is fine. In dire need to get this truck out of my hair, any help would be greatly apprechiated. thanks in advance.

The cost to diagnose the P1687 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What’s the fault code on my Jeep Grand Cherokee?

Mine is a 2000 Jeep Grand Cherokee 4.7L V8 4×4 Auto. Its Not Starting and only fault code P1678. it doesn’t wane clear. can that be the problem for not starting.” You can’t post conmments that contain an email address. Jeep grand cherokee 2000 beeps 3 times pauses and beeps three more times then says perform service.

Mine is a 2000 Jeep Grand Cherokee 4.7L V8 4×4 Auto. Its Not Starting and only fault code P1678. it doesn’t wane clear. can that be the problem for not starting.” You can’t post conmments that contain an email address. Jeep grand cherokee 2000 beeps 3 times pauses and beeps three more times then says perform service.

What to do if your instrument cluster is not working?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Anything and Everything… Beautiful today in Canyon Lake.

How to check no Cluster Bus message OBDII?

Using ohmmeter, check resistance between terminal No. 9 (White/Black wire) on connector C1 for instrument cluster and terminal No. 28 (White/Black wire) on PCM connector C3. If resistance is less than 5 ohms, replace instrument cluster. Perform TEST VER-2A .

What should temperature be for P fault code?

Damaged sensor, damaged circuit wires, damaged connector or damaged ECM output pins. Check for approximately 2280 to 2736 ohms at temperature of 19 to 21 degrees C between system circuits A-H4 and A-J4. Refer to service manual for more details. I just encountered P0505.

How many ohms are in a P fault code?

Check for approximately 2280 to 2736 ohms at temperature of 19 to 21 degrees C between system circuits A-H4 and A-J4. Refer to service manual for more details. I just encountered P0505. I could not find anything about it with a search on this site (I just now noticed the sticky).