How to check the oil level on a SL2?
Start the engine for 10 to 15 seconds, turn it off, wait 2 minutes, and then check the oil level on the dipstick. Add more oil if necessary. Remove the drain pan and old filter from under the SL2. Replace the oil filler cap and then close the hood. Release the parking brake and then drive it down off the ramps.
What kind of engine does a Saturn SC1 have?
The Saturn S-series; SC1, SL1, SC2 and SL2 ran from 1991 to 2002. These models featured the 1.9-liter 4-cylinder engine which was available in single or dual overhead cams.
Is the 1.9 liter engine the same as the SL2?
Regardless of which version of the S-series vehicle you are working on, (SC stood for sports coupe and SL stood for Sedan Line) the 1.9 liter engine employs the same oil filter and it is located in the same position. Drive the SL2 up onto the car ramps, apply the parking brake and then release the hood latch.
How do you change the oil in a Saturn SL?
For most Saturns, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Saturn SL oil filter wrench. If your SL is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your SL.
Start the engine for 10 to 15 seconds, turn it off, wait 2 minutes, and then check the oil level on the dipstick. Add more oil if necessary. Remove the drain pan and old filter from under the SL2. Replace the oil filler cap and then close the hood. Release the parking brake and then drive it down off the ramps.
What kind of oil does a Saturn have?
Most Saturns have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn’t printed on the oil cap, check your owners manual for the exact type before adding new oil.
How to change the oil in a BMW Z3?
Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9. Add Oil – Determine the correct oil type and add oil