How to check fuel pressure on a Pontiac Grand?

Attach the vacuum hose to the port on the fuel pressure regulator. Plug in the electrical connection for the fuel pump near the fuel tank on 2.4-liter models. On 2.2-liter and V-6 models, replace the cap on the end of the fuel rail.

Where is the pressure regulator on a Pontiac Grand?

Disconnect the fuel return line from the pressure regulator, located at the end of the fuel rail using a wrench. Pull the vacuum hose from the port on the pressure regulator. Unscrew the fasteners attaching the fuel pressure regulator to the fuel rail using a Torx screwdriver. Pull the regulator from the fuel rail.

Why is my GM 3.1L fuel pump not working?

CASE 2: If the fuel pressure gauge registered 35 PSI. This fuel pressure gauge result lets you know that the fuel pump is working and delivering enough fuel to the fuel injectors. The reason your 3.1L or 3.4L GM vehicle is not starting is due to another reason.

What does 0 psi mean on fuel pump?

The fuel pressure gauge will register 0 PSI. OK, let’s analyze your test results: CASE 1: If the fuel pressure gauge registered 0 PSI. This confirms that the cause of your 3.8L equipped GM car or mini-van is caused by a lack of fuel.

What is the fuel pressure for a GM 3.1 liter engine?

Fuel Pressure for Later Engines The primary fuel requirement for all other vehicles with the 3.1 liter engine is 41 to 47 PSI. This includes some 1990 A body vehicles, 1990 through 1994 J body vehicles,1991 through 1994 L body vehicles, 1994 N body vehicles, and 1991 through 1994 W body vehicles.

What causes no start on a GM 3.1L?

I’m going to show you two different methods to verify if the no start condition on your 3.1L or 3.4L GM vehicle is due to a lack of fuel, which usually means that the fuel pump has gone bad. One method involves using just starting fluid and the other involves using a fuel pressure gauge.

What is the pressure at the time of spark discharge?

2) Pressure in the combustion chamber at time of spark discharge – Depends on compression and aspiration of the engine. High compression engines and engines with forced induction have higher combustion chamber pressures at time of spark discharge. Higher cylinder pressure requires higher voltage for the spark to occur.

When to do a fuel pressure test on your car?

If your car is idling or running weird (high idle, low idle, hard to accelerate, studdering, hard to start) then this is one of the first tests you should do. Diagnose high fuel pressure, low fuel pressure, a broken check valve in the fuel pump, broken fuel pressure regulator, or leaking injectors.

Where is the fuel tank cap on a Pontiac Grand?

Plug in the electrical connection for the fuel pump near the fuel tank on 2.4-liter models. On 2.2-liter and V-6 models, replace the cap on the end of the fuel rail. Eric Grosso has been a journalist since 2002, working as a staff reporter covering government events, school districts, sporting events and entertainment acts.

How do you test a GM fuel pump?

GM has made it super easy for you and me to test the fuel pump (with a fuel pressure gauge), since they have installed a fitting (called the Schrader valve) on the fuel pressure regulator to which you and I can connect the fuel pressure gauge to (see photo above).

What are the symptoms of a bad fuel pump?

Symptoms Of A Bad Fuel Pump. Which And Where To Buy A Fuel Pressure Gauge. FUEL PUMP TEST 1: Fuel Pressure Test With Gauge. FUEL PUMP TEST 2: Using Starting Fluid. More 3.8L V6 GM Tutorials. You can find this tutorial in Spanish here: Cómo Probar La Bomba de Combustible (GM 3.8L) (at: autotecnico-online.com ).

How much horsepower does a Pontiac Grand Prix have?

The new Grand Prix sought to deliver performance as attention-getting as its styling, with increased installation percentages for manual transmissions and engine options up to the 390 hp (290 kW) 428 HO.

What was the power rating of the 1967 Pontiac Grand Prix?

Both optional 428 cu in (7.0 L) V8s received higher power ratings of 375 hp (280 kW) for the base version and 390 hp (290 kW) the HO. Interior trim only received minor changes from 1967 aside from revised door panels. This would be the final year for the B-bodied, full-sized Grand Prix.

How do you relieve the fuel system pressure?

Relieve the fuel system pressure. On V-6 and 2.2-liter models, remove the port cap on the end of the fuel rail. Place a rag at the end of the rail and press the small port with a small flat-head screwdriver to release the pressure.

Where is the fuel pressure gauge on a Chrysler 2L?

Connect the fuel pressure gauge to the Schrader valve on the fuel rail. When ready, ask your helper to crank the engine while you observe the fuel pressure tester’s gauge. 1.) The fuel pressure gauge will register 35 PSI, or

What’s the stock fuel pressure on a 2005 Pau?

Autozone has a GP/Sorenson FPR PN 800-302 listed for the 2000 PAU and 2005 PAU. This is the PN reg we picked u. The stock OEM reg was a Bosch and it specifically said 3.5 bar on it. But yet they have different rated fuel pressures.

What are the symptoms of low fuel pressure?

Low Fuel Pressure Symptoms & Causes 1 Unresponsive Throttle. All cars require proper fuel delivery to their cylinders in order… 2 Difficulty Starting the Car. Low fuel pressure will also make it hard for you to ignite your car’s… 3 Stalling Engine. If your car’s engine stalls while running, it is a clear sign you are having some…

Can a car run with high fuel pressure?

Gasoline run cars are usually not a huge threat to the environment as they do not emit harmful chemicals from their exhaust. However, if your car starts to excrete thick black smoke from the exhaust after you start it, there is definitely something wrong with the pressure in your fuel system. But in this case, it will be due to high fuel pressure.

Why is my fuel pump not producing pressure?

The fuel pump is able to create pressure using electricity but if it is not getting the adequate voltage of electricity it will not be able to function properly. Consequently, the fuel will not be released at the perfect pressure and your car will lose efficiency.

What happens to spark plugs when fuel pressure is low?

A low-pressure fuel system will destroy the spark plugs that ignite the fuel in an engine’s cylinder. If by chance you are replacing them and you find they are worn out before their time, you might be looking at a problem with your fuel system. Fortunately, the fuel system in a car requires only needs minor tweaks.

Why is my GM 3.8L fuel pump not working?

CASE 2: If the fuel pressure gauge registered 35 PSI. This fuel pressure gauge result lets you know that the fuel pump is working and delivering enough fuel to the fuel injectors. The reason your 3.8L GM vehicle is not starting is due to another reason.

Can a fuel pump be replaced in a Pontiac Grand Prix?

The Pontiac Grand Prix has an electric fuel pump so you should ensure that its fuses and relays are working before checking it. You may need to clean your fuel pump or replace it if your gas tank is not empty, but your vehicle has difficulty getting fuel.

Are there any problems with the Pontiac Grand Prix?

I have a 2007 grand prix, just bought it 2 weeks ago, transmission acts funny on occasion, shifts hard on occasion, most of the time it’s ok, car has132,000 on it, transmission fluid smells fine, could someone please help me please? I’ve been told that the pressure control value or whatever it’s called could be going bad

Where is the fuel pump on a Pontiac Grand Am?

Check in the engine compartment fuse box, it should be near the battery under the hood. The cover should be pretty easy to remove. The fuel pump should be connected through a fuse in slot 48. If that fuse looks good, then you may want to check the fuel pump relay (also inside the engine compartment fuse box).

Do you need a fuel pump pressure gauge?

Owning a fuel pressure gauge is now becoming a must. All vehicles now use an electrical fuel pump to deliver fuel (under high pressure) to the fuel injectors and the best way to diagnose this fuel pump is with a fuel pressure gauge.

What was the fuel pressure requirement in 1989?

Some 1988 through 1989 vehicles with the 3.1 liter engine have a fuel pressure requirement of 34 to 47 PSI (pounds per square inch). This includes A and F body vehicles. The F body vehicles continued this fuel pressure requirement through 1992. 1989 W body vehicles have a fuel pressure requirement of 40 to 47 PSI.

Are there problems with the GM 3.1L V6 engine?

The only “problem” block in the 3.1L V6 engine family to watch out for was the one used in some 1988-’90 FWD cars and minivans, casting #10065459. This particular casting tended to develop cracks near the center cylinders.

What is the crank sensor on a GM 3.1L engine?

This article will help you test the ignition control module (ICM) and 3X crankshaft position sensor on all of the GM 3.1L and 3.4L overhead valve engines (the 3X crank sensor is also known as the 7X Crank Sensor).

What happens when no fuel comes out of fuel line?

No fuel coming out of the fuel line further confirms a bad fuel pump. Making sure that the fuel pump is getting power (12 Volts) when you crank the engine. How? By tapping into the wire that feeds the pump power and making sure it’s feeding the pump with 10 to 12 Volts when your helper is cranking the engine.

What should the fuel pressure be when the engine is off?

Your fuel pressure gauge should register between 53-59 PSI (if the fuel pump is working correctly). NOTE: The fuel pressure specification of 53-59 PSI is with the key on but engine off (KOEO).

What’s the fuel pressure on a GM 2.4L?

Rough running is usually the result of worn spark plugs and wires. Some GM engines do run poorly or won’t even start when fuel pressure is just a few pounds low, but that applies more to truck engines. Fuel pressure for the 2.4L is 52 – 58 pounds. Fuel pressure for the 3.4L is 48 – 55 pounds.

Navigation