How to change the brake light bulb on a Santa Fe?
How to change a brake, rear turn signal, parking or reverse light bulb in a 3rd generation 2013-2016 Hyundai Santa Fe.
Where is the rear light bulb socket on a Hyundai Santa Fe?
The grey plastic Rear Turn Signal bulb socket is located at the bottom of the assembly. Rotate the base of the socket 1/4 turn counterclockwise and pull it straight out of the housing. Push the old bulb down in to the socket and rotate it 1/4 turn counterclockwise before pulling it straight out.
How do you replace a rear brake light bulb?
Follow the wires to the back of the light that you need to replace—that’s the bulb holder you want to unscrew, or, rather, pull out. It doesn’t actually unscrew; instead, you only turn it a quarter turn or so to unseat it and pull it out. Finally!
Where is the turn signal bulb on a Santa Fe?
The rear turn signal light bulb is located at the center of the tail light assembly. Rotate the white light bulb socket 1/4 turn counter clockwise and pull it straight out of the assembly. Push down on the turn signal bulb, rotate it 1/4 turn counter clockwise and pull it straight out of the socket.
How to replace the tail light bulbs on a Hyundai Santa Fe?
To replace any of the tail light bulbs in a Hyundai Santa Fe requires a small flathead screwdriver and a 10mm socket with a 1/4″ drive ratchet.
Where is the brake light bulb located on a Santa Fe?
The brake light bulb is located closest to the center line of the vehicle. Rotate the grey brake light bulb socket 1/4 turn counter clockwise and pull it out of the tail light. To remove the bulb from the socket, push down on it and rotate it 1/4 turn counter clockwise before pulling it straight out of the socket.
How do you change the tail light bulb?
Push down on the turn signal bulb, rotate it 1/4 turn counter clockwise and pull it straight out of the socket. Push in a new # 1156Aamber colored turn signal light bulb into the socket and rotate it 1/4 turn clockwise to secure it in place. Then insert the socket into the tail light assembly and rotate it 1/4 turn clockwise to lock it in place.
How do you remove a parking light bulb?
Push Down & Rotate 1/4 CC Rotate the light grey base of the parking bulb 1/4 turn counter clockwise and pull it straight out of the lift gate. Push the parking light bulb down and rotate it 1/4 turn counter clockwise to remove it from the socket.