How to change shift from Park to shift?
First – Adjust the shift cable in the park position. Place the shifter in the park position, lift the vehicle and rotate the rear wheels until the park pawl is verified to be engaged (wheels will not move). Release the cable adjustment lock and allow the cable to relax.
Why does my shift indicator not change from Park to drive?
The first issue is that the electronic shift position indicator in the instrument panel cluster is not accurately changing when I’m shifting. For example, I will shift from Park to Drive and the display will stay on P or move to N, then when I begin to drive the display will change from P or N to D.
When do I get the intermittent shift to Park message?
There may be an intermittent Shift to Park message displayed on the Driver Information Center (DIC) when the vehicle has been shifted to Park and the ignition has been turned to the Off position (Fig. 32) on some 2016-2019 Malibu, Volt; 2017-2019 Acadia; 2018-2019 Traverse; and 2019 Blazer models.
Why does my Cadillac say shift to Park?
Some customers may state that the Drivers Information Center (DIC) is displaying a “Shift To Park Message” when the vehicle is in park. This may also be followed by a concern where the ignition mode switch will not go to the off position. First – Adjust the shift cable in the park position.
Why does my shift to Park light stay on?
Have not taken to the dealer as vehicle is out of warranty and problem is simply annoying at this point. Shift to park light stays on although vehicle is in park. If I jam it hard, it will often go out, sometimes I have to put it drive and park again before the light goes off.
First – Adjust the shift cable in the park position. Place the shifter in the park position, lift the vehicle and rotate the rear wheels until the park pawl is verified to be engaged (wheels will not move). Release the cable adjustment lock and allow the cable to relax.
Why do I get a shift to Park message?
The Shift to Park message may be the result of a build-up of material on the contacts of the Park switch when it is activated in the transmission control (shifter) assembly.
Some customers may state that the Drivers Information Center (DIC) is displaying a “Shift To Park Message” when the vehicle is in park. This may also be followed by a concern where the ignition mode switch will not go to the off position. First – Adjust the shift cable in the park position.