How to change a serpentine belt in under 15 minutes?
Wear protective clothing, eye wear and gloves to avoid injury. Step 1 – Remove engine covers, shrouds or plastic guards that may cover the work area. (Needed to access to the front of the engine.) Step 2 – Locate the belt tensioner which is under spring tension to hold pressure on the belt which keeps it secure.
Where is the serpentine belt tensioner on a Ford truck?
It’ll be in the gap between the engine block and the fan. Insert either your 1/2” drive ratchet or your belt remover tool into the tensioner. Rotate clockwise towards driver side. Figure 2. The serpentine belt tensioner is highlighted above. It looks and operates the same way in most Ford V8s and V6s. That includes diesels.
How do you remove the serpentine belt on a Ford F-250?
While holding the tool in place to release tension, unhook the serpentine belt from the tensioner pulley. Once you have it off one pulley, you can release the tool to be able to use both hands to remove it from the rest of the pulleys. F-250s and Super Duties with gas engines will have the same belt routing diagrams as their F-150 counterparts.
Can you change serpentine belt on EcoBoost V6?
The 3.5L Ecoboost V6, 3.7L V6, and 5.0L Coyote V8 all have non-adjustable tensioners, meaning you cannot simply loosen the tensioner to remove the belt. To change serpentine belts, you’ll either have to allow a shop to do it, or use a stretchy belt remover/installer to do it yourself. If playback doesn’t begin shortly, try restarting your device.
How do you reinstall a serpentine belt on an auto tensioner?
Reverse the procedure to reinstall the serpentine belt on the pulley system auto tensioner. Be careful to get the belt on the the other pulleys and aligned properly on all parts of the complicated routing, then apply the tool to allow the belt to be slipped onto the tensioner pulley.
How to change serpentine belt on Superduty alternator?
Please try again later. Changing a alternator , serpentine belt or any of the pulleys are such a pain to get to the tensioner well this will help so you a simple and easier way. Now you can do it by yourself but with a buddy makes it a breeze.
Can you change the serpentine belt on a Ford truck?
The 3.5L Ecoboost V6, 3.7L V6, and 5.0L Coyote V8 all have non-adjustable tensioners, meaning you cannot simply loosen the tensioner to remove the belt. To change serpentine belts, you’ll either have to allow a shop to do it, or use a stretchy belt remover/installer to do it yourself.
Can a loose serpentine belt cause power steering to fail?
A loose belt may even cause both to work intermittently. A lack of cold air from the air conditioning and and increase in tension in the steering wheel are both signs of these accessories failing. Be sure to check the power steering fluid if you begin to have issues with your power steering. Check the belt’s tension if pulleys begin to fail.
How do you change the belt on a Kia serpentine?
Move the serpentine belt tensioner pulley off the belt using the belt tool. Slide the belt off the tensioner pulley with your other hand and then relax the tensioner and remove the tool. Pull the belt off the pulleys and out from under the engine well by hand.
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
Why is my serpentine belt cracking under the hood?
That awful squealing beneath the hood may be coming from a frayed or cracked serpentine belt. It’s a crucial part of the engine assembly—here are step-by-step instructions for replacing your serpentine belt without bringing your car to the shop.
When do you replace the serpentine belt on a car?
It’s a crucial part of the engine assembly—here are step-by-step instructions for replacing your serpentine belt without bringing your car to the shop. Apr 1, 2009. This belt, obviously past its prime, ran for 115,000 miles, and it was still within the tension limits specified.
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
Where is the serpentine belt on a GM 3400?
This is the routing of the serpentine belt on the GM 3400 V6 engine. It is used in many Buick, Pontiac, Chevrolet and Oldsmobile cars. Question: A friend put on a tension pulley for me. It came off and now the bolt will not screw in? Answer: Maybe the treads are stripped. Question: The tension pulley on my 3400 is in a different place y is that?
How can I increase the tension on my serpentine belt?
Increase the tension on the belt. If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt.