How often should I change the serpentine belt on a Honda Accord?

How often should I replace the serpentine belt? It is recommended to replace the serpentine belt in your Honda every 60,000 – 100,000 miles or as necessary if it appears damaged. This guide covers changing the serpentine belt (drive belt) on a 2002, 2003, 2004, 2005, 2006, and 2007 Honda Accord with the 2.4L engine (4 cyl.).

How to find a genuine Honda Accord drive belt?

Enter your VIN for the most accurate results. Enter your VIN for the most accurate results. We offer a full selection of genuine Honda Accord Drive Belts, engineered specifically to restore factory performance. Please narrow the Serpentine Belt results by selecting the vehicle.

Why is the belt on my Honda Accord whining?

Not replacing the belt can lead to serious damage to your motor. Often, the telltale sign that a belt is “going” is a noticeable screech or whining sound. It’s caused by the friction of the belt against the pulley.

Why is the alternator belt on my Honda Accord squeaking?

Many vehicles run several components of the motor through a system of belts and pulleys. All of those belts can wear over time, and should certainly be replaced per recommended maintenance intervals. Not replacing the belt can lead to serious damage to your motor.

How do you replace the serpentine belt on a Honda Odyssey?

How to Replace the Serpentine Belt in a Honda Odyssey Open the hood of your Honda and locate the negative battery cable on the battery. Loosen the clamp bolt on the battery cable end with a wrench and then remove the cable from the battery. Locate the automatic belt tensioner on the front of the engine.

How much does it cost to replace a drive belt on a Honda Accord?

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing. Honda Accord Serpentine/Drive Belt Replacement costs $132 on average. What is a serpentine belt and how does it work? A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley.

Do you need to replace the serpentine belt tensioner?

Serpentine belt is easy to replace. If you don’t have problems now, just get any brands anywhere, you’ll be fine. Specific brands may work better than others when you already have a problem. Belt tensioner is basically a spring with two pulleys. The can last the life time of a car. No need to replace unless there is a problem.

How can I tell when to replace my serpentine belt?

Your mechanic can let you know when to replace the serpentine belt or how many miles it has left. Look on the inside of the belt (the ribbed side that touches the pulleys on the alternator, water pumps, and other engine accessories).

When to replace serpentine belt on VW Jetta?

Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.

When to replace the serpentine belt on a Land Rover?

The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.

How do you remove serpentine belt on Honda Accord?

Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.

What kind of wrench do I need to replace serpentine belt?

The automatic-tension pulley. A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force.

What happens if your fingers get caught in the serpentine belt?

Be sure that your fingers and your helper’s fingers are completely clear of the belt when the tensioner is released back to normal. The belt is very tight, which will cause a serious injury if your fingers get caught between the belt and pulley. Start the engine and stand clear of the belt.

What kind of wrench do I need to remove belt on Honda Accord?

A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.

How do you release tension on a Honda Accord?

To release the tension on the tensioner pulley, put a 14mm wrench onto the nut-head on the tensioner pulley (A), and pull the wrench toward the front of the car as shown. On the Honda Accord, this is a 14mm hex head on the tensioner pulley.

What kind of belt do I need for a 2009 Honda LX?

I just did the belt on my 2009 LX and went with a Dayco (I like their W design with Kevlar) but I think any name brand will do you just fine. As others have written, if the tensioner is functioning properly now, it’ll be fine with your new belt setup.

Do you need to replace a Honda belt tensioner?

Specific brands may work better than others when you already have a problem. Belt tensioner is basically a spring with two pulleys. The can last the life time of a car. No need to replace unless there is a problem. Honda (Bando ?), Gates, Continental/Goodyear, and so on are all quality belts.

Navigation