How much Oil can I put in a Harley Davidson Twin Cam?
The engine oil capacity is 3 quarts (2,800 ml; 100 imp fl oz). Most likely there is still oil left over in the sump, so fill it with 2 quarts (1,900 ml; 67 imp fl oz) and check the dip stick. Add oil until the oil level is between the low and high indicators on the dip stick. Replace the fill cap.
What does Feuling vented dipstick do for Harley twin cam?
Feuling Vented Dipstick for Harley Twin Cam & M8 Touring Models. The Feuling Vented Dipstick can help motorcycles that experience what is called oil blow by. This is when oil is pushed out through the air intake. This problem is not only frustrating, it creates an oily mess and can even blow out oil onto the rider if the problem is severe.
How do you fill a 20w50 motorcycle oil tank?
Screw the filler plug into the transmission with a 3/8-inch Allen wrench. Tighten the filler plug to 50 inch-pounds with a torque wrench. Pull the filler cap out of the oil tank. Fill the oil tank with 3 1/2 qt. of 20W50 motorcycle oil, using a funnel. Clean up any spilled oil with a rag, then reinsert the filler cap into the oil tank.
Where is the oil drain plug on a softail motorcycle?
Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.
Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.
Screw the filler plug into the transmission with a 3/8-inch Allen wrench. Tighten the filler plug to 50 inch-pounds with a torque wrench. Pull the filler cap out of the oil tank. Fill the oil tank with 3 1/2 qt. of 20W50 motorcycle oil, using a funnel. Clean up any spilled oil with a rag, then reinsert the filler cap into the oil tank.
What causes a dipstick to blow out on an oil tank?
Look in the filler of the tank and you can see the vent line in there. If that gets covered in oil the system can’t work right and so it blows out the oil filler cap. Also wipe the rubber seal on the cap too , you don’t want oil on it so it shoots out easily. almost has to be over full.
How to change the three oil compartments on the Harley?
How to Change the Three Oil Compartments on the Harley Davidson Twin Cam Motorcycle. 1 Step 1. Warm up your Harley-Davidson motorcycle to bring its fluids to operating temperature. Start the motor and let it idle for at least 3 minutes, 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items